1Z0-902 Training & Certification Get Latest Oracle Engineered Systems Updated on Sep 30, 2025 [Q40-Q62]

4.5/5 - (2 votes)

1Z0-902 Training & Certification Get Latest Oracle Engineered Systems Updated on Sep 30, 2025

Certification Training for 1Z0-902 Exam Dumps Test Engine

Oracle 1z1-902 exam is intended for individuals who have experience with Oracle database systems and want to demonstrate their expertise in implementing and managing Oracle Exadata Database Machine X8M systems. 1Z0-902 exam is targeted at database administrators, system administrators, and IT professionals who are responsible for managing Oracle database systems and want to enhance their knowledge and skills.

NO.40 Which two statements are true about the initial storage configuration after the standard (non-virtualized) deployment of a new Exadata Database Machine with High Capacity storage servers?

The sparse_<DBM_NAME> diskgroup is created automatically.

There is free space available on the hard disks inside the database servers for possible extension of the /uoi file system.

The DATA_<DBM_Name> and RECO_<DBM_NAME> ASM diskgroups are built on with DATA on the outer-most tracks and RECO on the inner-most tracks of the physical disk.

There is free space available on flashdisks inside the Exadata storage servers for possible use for storage indexes.

There is free space available on flashdisks inside the Exadata storage servers to configure Exadata Smart Flash Logs.

NO.41 Which dbmcli command is NOT valid on Exadata X9M?

dbmcli -e “LIST METRICHISTORY WHERE name LIKE ‘DS_.*'”
B) dbmcli -e “LIST METRICCURRENT WHERE name = ‘DS_TEMP’ “

dbmcli -e “LIST IBPORT DETAIL”

dbmcli -e “LIST ALERTHISTORY WHERE agelnMinutes < 15”

NO.42 You have been notified by your Network Administrator that an upstream switch has been replaced due to a hardware fault. Which command verifies that the client network on your Exadata X9M-2 Database Server is available via both client switches?

ifconfig -a legrep “re0| re1”

/opt/oracle.SupportTools/ibdiagtools/checkbadlinks.p1 -all

netstat -rn

cat /proc/net/bonding/bondeth0

NO.43 Which two statements are true about Auto Service Request (ASR) with an Exadata Database Machine?

ASR Manager must be installed and configured on a dedicated server external to the Database Machine.

Configuring ASR is mandatory for all Database Machine assets.

ASR Manager must be installed and configured on one of the database servers.

ASR can upload configuration metadata to support problem resolution.

ASR Manager opens a service request (SR) automatically after sensors detect hardware faults.

ASR communicates with Oracle support services using HTTPS.

NO.44 Which two statements are true about Auto Service Request (ASR) with an Exadata Database Machine?

ASR Manager must be installed and configured on a dedicated server external to the Database Machine.

Configuring ASR is mandatory for all Database Machine assets.

ASR Manager must be installed and configured on one of the database servers.

ASR can upload configuration metadata to support problem resolution.

ASR Manager opens a service request (SR) automatically after sensors detect hardware faults.

ASR communicates with Oracle support services using HTTPS.

NO.45 Which three of the following options are available for database consolidation on Exadata?

Multiple pluggable databases in one or more container databases on a Virtual Machine or Bare Metal cluster

Bare Metal deployment with one database per database server

A single database with one or more schema per application

Multiple databases spanning a Bare Metal and Virtual Machine cluster to provide resource isolation and consolidation concurrently

Multiple Databases on a cluster

Multiple Virtual Machine clusters supporting a single database for greatest resource isolation

NO.46 An Exadata X9M-2 Elastic Rack with 4 Database Servers and 8 HC Storage Servers and 3-phase 24kVA PDUs is being installed in a Data Center. However, the Data Center is only providing enough power for a single cable from each PDU. Which statement is correct?

A splitter cable can be used to provide power to all PDU cables.

The power cables from the servers to the PDUs can be rearranged inside the rack following OECA guidance to utilize a single PDU power cable.

The installation cannot proceed until two power feeds are available per PDU.

The installation can go ahead, no change is required.

NO.47 How is Exadata Secure RDMA Fabric isolation used in X9M-2 with virtualization enabled?

With Secure Fabric isolation, each Storage Server runs multiple KVM guests each dedicated to a Database VM cluster using a dedicated network partition and VLAN ID. This provides security and isolation between multiple tenants or VM clusters.

With Secure Fabric isolation, each Database VM Guest uses a dedicated network partition and VLAN ID for client networking between application servers. This improves security by preventing man in the middle attacks.

With Secure Fabric isolation, each Database VM Cluster uses a dedicated network partition and VLAN ID for Data Guard networking between the primary and disaster recovery Exadata racks. This improves security by isolating data guard traffic onto an encrypted network between data centers.

With Secure Fabric isolation, each Database VM cluster uses a dedicated network partition and VLAN ID for cluster networking between the database servers in the VM Cluster. This provides security and isolation between multiple tenants or VM clusters.

NO.48 You are updating your Exadata X9M-2 Elastic Database Machine with 6 database servers and 12 High Capacity Storage Servers. You will be using patchmgr to apply updates across the entire machine while still maintaining database availability.
Assuming you are driving patchmgr from an external server, which statement is true about the execution phase?

patchmgr must be invoked with the -rolling argument. Each component type must be upgraded independently of the other.

patchmgr cannot apply updates in a rolling manner, you must manually apply patches with the dbnodeudpate and cellupdate tools if high availability is required.

patchmgr will apply patches in component groups consisting of 1 database server and 2 storage servers to minimize disruption.

patchmgr must be invoked with the -rolling argument with all database and storage servers listed in a single input file.

NO.49 You are in the process of upgrading your nonvirtualized X9M-2 Database Machine elastic configuration with 4 database servers and 7 HC storage servers with an additional 4 database servers and 7 HC storage servers.
The new storage servers are called DM01CEL08 through dmoicel14.
After creating 96 new griddisks, you issued this SQL statement:

How many failgroups if any, will be added to the DATE diskgroup by executing this SQL statement?

1 consisting of all 96 griddisks

96 consisting of one griddisk each

0 because the new griddisks will be added to the existing faiigroups

12 consisting of seven griddisks each

7 consisting of 12 griddisks each

NO.50 You have been tasked with replacing a memory module of an Exadata Storage Server and need to power off the affected storage server. Which two commands must you execute to safely power off the storage server in an Exadata X9M Database Machine?

CeLLCLI> alter cell shutdown SERVICES all on the affected storage server

CeLLCLI> list GRIDDISK where status != ‘inactive’ on the affected storage server

‘crsct1 stop cluster -all’ on one of the database servers

CellCLI LIST GRIDDISK ATTRIBUTES name WHERE asmdeactivationoutcome != ‘Yes’ on the affected Storage server

CellCLI alter GRIDDISK all inactive on the affected storage server

shutdown -h now’ on the affected storage server

NO.51 You want to examine how much Smart Scan activity is occurring.
Which two would provide the information you require?

the number of full table scans that accessed the table

the number of Smart Scans performed for the table on all the storage servers, as shown when performing a list activerequest command using CELLCLI on all the cells

the number of serial queries that accessed the table

the number of parallel queries that accessed the table

the number of Smart Scans performed for the table on all the storage servers, as shown when performing a list ACTIVEREQUEST command using EXACLI on all the cells

NO.52 What are two recommended configuration best practices for backup and recovery on Exadata?

Placing the backup network on dedicated switches installed in the top of the rack (ToR) has the benefits of isolating the backup network from other workloads and providing a greater level of control.

Even if the backup was limited to writing to four tape drives, eight channels could be specified to expedite the restore process.

The internal Recovery Appliance backup and restore processing is optimized when the RMAN FILESPERSET parameter is set to 1 for the level 1 incremental backup set.

When off-site long-term backup retention is needed, use Oracle Database Backup Cloud Service as a low-cost, offsite scalable storage for a disaster recovery solution.

NO.53 Which three component faults are covered by Oracle Auto Service Request (ASR)?

Proactive recommendations for firmware

Fan trays

System Controller (SC)

I/O boards

RoCE network interface cards

File system unmounted

NO.54 Which are two correct statements for managing virtual deployment using Oracle Exadata Deployment Assistant (OEDA)?

OEDA allows customers to have both bare metal (BM) and virtual machine (VM) in an Exadata X9M Quarter Rack.

There is no limit on the number of VMs in an Exadata rack as long as the Exadata rack has adequate resources.

OEDA deployment steps include calibrate cells, create cell disks, and resecure machine.

OEDA sets up key-based authentication for the root user by using the setuprootssh.sh utility included with OEDA.

NO.55 Which are two correct statements for managing virtual deployment using Oracle Exadata Deployment Assistant (OEDA)?

OEDA allows customers to have both bare metal (BM) and virtual machine (VM) in an Exadata X9M Quarter Rack.

There is no limit on the number of VMs in an Exadata rack as long as the Exadata rack has adequate resources.

OEDA deployment steps include calibrate cells, create cell disks, and resecure machine.

OEDA sets up key-based authentication for the root user by using the setuprootssh.sh utility included with OEDA.

NO.56 What is the maximum DRAM capacity you can expand an X9M-2 DB Server?

1536GB

512GB

2048GB

768GB

1024GB

384GB

NO.57 Examine these commands:
1. Execute “crscti stop cluster -all” as the grid user from one database server.
2. Execute “crscti stop cluster -all” as root from one database server.
3. Power off all network switches.
4. Execute “crscti stop cluster” as root from one database server.
5. Execute “crscti stop cluster” as the grid user from one database server.
6. Power off the rack using the power switches on the PDUs.
7. Execute “shutdown -h now” on all database servers.
8. Execute “shutdown -h now” on all Exadata storage servers.
Which is the correct order or the required commands to completely power off an Exadata Database Machine in an orderly fashion?

5, 8, 7, and 6

4, 7, 8, 3, and 6

2, 8, 7, 3, and 6

2, 7, 8, and 6

1, 8, 7, 3 and 6

NO.58 You have been asked to investigate why an Exadata Database Server stopped communicating on the client network for 10 minutes over the past weekend.
Which command would help investigate this?

$ ${ORACLE_HOME}/suptools/tfa/release/tfa_home/bin/tfact1 -from <Fridays_Date>_17:00:00 -to <Sundays_Date>_23:59:00

# /opt/oracle.SupportTools/ibdiagtools/netcheck/runDiagnostics.pm -from <Fridays_Date>_17:00:00 -to <Sundays_Date>_23:59:00

# /opt/oracle.ExaWatcher/GetExaWatcherResults.sh -from <Fridays_Date>_17:00:00 -to <Sundays_Date>_23:59:00

# /opt/oracle.SupportTools/exachk/exachk -from <Fridays_Date>_17:00:00 -to <Sundays_Date>_23:59:00

NO.59 Which two statements are false about backup to ZFS Storage Appliance (ZFSSA)?

ZFSSA may connect directly to the Exadata 100Gb RoCE network switches.

Top of Rack (ToR) switches are managed as part of the hardware stack and software levels are upgraded during the patching process.

When backing up multi-rack systems, sharing Exadata X9M switches is recommended.

ZFS Snapshots can provide rapid cloning of development and test environment.

NO.60 You are updating your Exadata X9M-2 Elastic Database Machine with 6 database servers and 12 High Capacity Storage Servers. You will be using patchmgr to apply updates across the entire machine while still maintaining database availability.
Assuming you are driving patchmgr from an external server, which statement is true about the execution phase?

patchmgr must be invoked with the -rolling argument. Each component type must be upgraded independently of the other.

patchmgr cannot apply updates in a rolling manner, you must manually apply patches with the dbnodeudpate and cellupdate tools if high availability is required.

patchmgr will apply patches in component groups consisting of 1 database server and 2 storage servers to minimize disruption.

patchmgr must be invoked with the -rolling argument with all database and storage servers listed in a single input file.

NO.61 You are working on a remote Exadata Database Machine with current software and firmware. You now need to start a storage server after hardware maintenance.
Which ILOM command starts the storage server?

-> start /System

-> start /SP/console

-> set /SYS power_state=ON

You must be physically present in the data center to start an Exadata Storage Server.

-> start /SYSTEM/power

-> start /SYS/power

NO.62 You are providing oversight for the delivery of a new Exadata Database Machine.
1. Stabilize the Exadata Rack.
2. Unpack Oracle Exadata Rack.
3. Review the safety guidelines.
4. Let the Exadata acclimatize for 24 hours.
5. Power on Exadata PDU A.
6. Place Exadata in its allocated space.
7. Power on Exadata PDU B.
What is the correct order of these steps?

4,3,2,6,1,7,5

3,2,6,4,1,7,5

2,3,4,6,1,7,5

3,2,6,1,4,7,5

2,6,1,4,3,7,5

Step by Step Guide to Prepare for 1Z0-902 Exam: https://www.troytecdumps.com/1Z0-902-troytec-exam-dumps.html

High-quality Troytec review files

1Z0-902 Training & Certification Get Latest Oracle Engineered Systems Updated on Sep 30, 2025 [Q40-Q62]

troytecdumps

Leave a Reply Cancel reply

Related Posts

Give Push to your Success with Oracle Cloud 1Z0-1049-26 Exam Questions [Q40-Q62]

[Aug 22, 2026] 1Z0-171 Test Engine files, 1Z0-171 Dumps PDF [Q63-Q81]

Use 1Z0-1064-26 Exam Dumps (2026 PDF Dumps) To Have Reliable 1Z0-1064-26 Test Engine [Q41-Q57]

troytecdumps

Leave a Reply Cancel reply