[UPDATED] Cisco 300-620 Certification Exam Questions [Q215-Q230]

4.7/5 - (4 votes)

[UPDATED] Cisco 300-620 Certification Exam Questions

Quickly and Easily Pass Cisco Exam with 300-620 real Dumps

NO.215 An engineer must connect Cisco ACI fabric using Layer 2 with external third-party switches. The third-party switches are configured using 802.1s protocol. Which two constructs are required to complete the task?
(Choose two.)

spanning tree policy for mapping MST Instances to VLANs

MCP policy with PDU per VLAN enabled

MCP instance policy with administrative slate disabled

dedicated EPG for native VLAN

static binding of native VLAN in all existing EPGs

NO.216 An engineer plans to integrate a Cisco ACI fabric with VMware vCenter DVS. Which set of actions must the engineer take to ensure a successful integration?

Set a vCenter controller named ACI-VMware-Integration and select Read Only Access mode.

Set a vCenter controller named ACI-VMware-Integration and select Read Write Access mode.

Set a virtual switch named ACI-VMware-Integration and select Read Write Access mode.

Set a virtual switch named ACI-VMware-Integration and select Read Only Access mode.

NO.217 Refer to the exhibit.

Which action should be taken to ensure authentication if the RADIUS servers are unavailable?

Adjust the priority of server 10.1.1.1 to 1.

Set the fallback login to local.

Assign the user to the default role.

Set the default login realm to LDAP

NO.218 Refer to the exhibit. A company decided to decrease its routing footprint and remove RT-2 and RT-3 devices from its data center. Because of that, the exit point must be created from all the tenants by using the common tenant. Which two configuration tasks must be completed to meet these requirements? (Choose two.)

Move subnets from all the bridge domains to the EPG level and mark them with flag Shared between VRFs.

Update the L3Out ExtEPG subnet in the common tenant with flag Shared Route Control Subnet and Aggregate Shared Routes.

Mark all subnets with flag Shared between VRFs and attach contract Ctr-3 as a provider to all the EPGs.

Change contract Ctr-3 scope to Global, consume it by all EPGs, and flag all subnets with flag Shared between VRFs.

Export contract Ctr-2 into the tenant TN-1 and attach it as a consumer to all the EPGs in the tenant TN-1.

NO.219 When does the Cisco ACI leaf learn a source IP or MAC as a remote endpoint?

When VXLAN traffic arrives on a leaf fabric port from the spine and outer source IP is in the Layer 3 Out EPG subnet range.

When VXLAN traffic arrives on a leaf fabric port from the spine and outer source IP is in the bridge domain subnets range.

When VXLAN traffic arrives on a leaf fabric port from the spine and inner source IP is in the Layer 3 Out EPG subnet range.

When VXLAN traffic arrives on a leaf fabric port from the spine and inner source IP is in the bridge domain subnets range.

NO.220 Refer to the exhibit. VM1 and VM2 are in Cisco ACI POD1 and communication takes place.
Which event is triggered when VM2 is live migrated from POD1 to POD2?

Leaf 102 installs a bounce entry for VM2 pointing to the PTEP address of leaf 201.

Leaf 201 creates a tunnel with leaf 102 because of the bounced traffic that is destined to VM2.

Spines from POD2 send an MP-BGP EVPN update to the leaves in POD1 about the new location of VM2.

An MP-BGP EVPN update is received by spines in POD1 announcing the reachability of VM2 via the proxy VTEP address of the spines in POD2.

NO.221 An engineer configures port-12 on Leaf-101 and Leaf-102 to connect to a new server called SVR-
12. This server will belong to a new EPG-12 and needs to use Encapsulation VLAN-12. An already existing server, which is named SVR-10, is also connected to the same leaf switches.
SVR-10 belongs to EPG-10 and also uses Encapsulation VLAN-12. Which step must the engineer take to configure connectivity for SVR-12 and EPG-12?

Associate EPG-12 to the same BD as EPG-10.

Enable port local VLAN scope.

Disable native VLAN on both EPGs.

Assign the IP address of SVR-12 to a different subnet.

NO.222 Which method does the Cisco ACI fabric use to load-balance multidestination traffic?

PIM routing

spanning trees

shortest-path trees

forwarding tag trees

NO.223 Refer to the exhibit. VM1 and VM2 are in Cisco ACI POD1 and communication takes place. Which event is triggered when VM2 is live migrated from POD1 to POD2?

Leaf 102 installs a bounce entry for VM2 pointing to the PTEP address of leaf 201.

Leaf 201 creates a tunnel with leaf 102 because of the bounced traffic that is destined to VM2.

Spines from POD2 send an MP-BGP EVPN update to the leaves in POD1 about the new location of VM2.

An MP-BGP EVPN update is received by spines in POD1 announcing the reachability of VM2 via the proxy VTEP address of the spines in POD2.

NO.224 Refer to the exhibit.

Refer to the exhibit A customer must back up the current Cisco ACl configuration securely to the remote location using encryption and authentication. The backup job must run once per day The customer s security policy mandates that any sensitive information including passwords, must not be exported from the device Which set of steps meets these requirements?

Option A

Option B

Option C

Option D

NO.225 Refer to the exhibit. A customer is running an application that collects data from multiple servers.
The application does not support acknowledgments back to the servers. The customer environment is approaching its TCAM limits. The customer must implement a contract that will allow this communication and limit the number of TCAM entries. Which configuration meets these requirements?

Contract CTR-4:
Consumer: EPG-2, EPG-3
Provider: EPG-1
Subject:
Apply Both Direction: enabled
Reverse Filter Ports: enabled
Protocol: UDP, Src Port: Any, Dst Port: 5000

Contract CTR-3:
Consumer: EPG-1
Provider: EPG-2, EPG-3
Subject:
Apply Both Direction: enabled
Reverse Filter Ports: enabled
Protocol: UDP, Src Port: Any, Dst Port: 5000

Contract CTR-2:
Consumer: EPG-1
Provider: EPG-2, EPG-3
Subject:
Apply Both Direction: disabled
Reverse Filter Ports: disabled
Filter from Consumer to Provider:
Protocol: UDP, Src Port: Any, Dst Port: 5000
Filter from Provider to Consumer: empty

Contract CTR-1:
Consumer: EPG-2, EPG-3
Provider: EPG-1
Subject:
Apply Both Direction: disabled
Reverse Filter Ports: disabled
Filter from Consumer to Provider:
Protocol: UDP, Src Port: Any, Dst Port: 5000
Filter from Provider to Consumer: empty

NO.226 A network engineer implements an L3Out inside the Cisco ACI fabric. The engineer plans to connect a Cisco ACI leaf switch to a switch outside of the Cisco ACI fabric to exchange routes via a routing protocol. The external switch interface is configured with IP address 192.168.15.1/30.
The ACI engineer wants to use a routing protocol that uses a hierarchical network design. The Cisco ACI fabric should use the L3Out to access the Internet. Which set of steps must be taken to meet these requirements?

Set up the BGP Protocol policy with the appropriate Autonomous System number.
Create the Routed Outside object and Node profile, selecting BGP as the routing protocol.
Build the Interface profile, selecting SVI and the appropriate VPC.
Configure the 0.0.0.0/32 network as part of the External Network object.

Set up the EIGRP Protocol policy with the selected Autonomous System number.
Set up the Routed External Network object and Node profile, selecting EIGRP.
Create the Switch profile, selecting VPC and the appropriate interfaces.
Create the default network and associate it with the Routed Outside object.

Set up the EIGRP Protocol policy with the selected Autonomous System number.
Configure an Interface policy and an External Bridged Domain.
Create an External Bridged Network using the configured VLAN pool.
Build the Leaf profile, selecting Routed Sub-Interface and the appropriate VLAN.

Configure the OSPF Protocol policy with an area of 0.
Create the Routed Outside object and Node profile, selecting OSPF as the routing protocol.
Build the Interface profiles, selecting Routed Interface and the appropriate interface.
Set up the External Network object with a network of 0.0.0.0/0.

NO.227 A Cisco APIC is configured to authenticate users by using RADIUS by default. The network administrator must ensure that the users can access the APIC GUI with a local account if the RADIUS server is unreachable. Which action achieves this goal?

Enable Fallback Check for Default Authentication.

Configure the fallback login domain to reference Local Realm.

Set RADIUS Realm to connect with Console Authentication.

Create an additional login domain to associate with local accounts.

NO.228 An engineer is implementing a Cisco ACI data center network that includes Cisco Nexus 2000 Series 10G fabric extenders. Which physical topology is supported?
A)

B)

C)

D)

Option A

Option B

Option C

Option D

NO.229 What are two benefits of the Clos architecture? (Choose two.)

improved fabric scalability

complicated network design and implementation

multiple nonblocking ECMP paths from all leafs

limited fabric scalability

NO.230 An engineer configured Layer 2 extension from the ACI fabric and changed the Layer 2 unknown unicast policy from Flood to Hardware Proxy. How does this change affect the flooding of the L2 unknown unicast traffic?

It is forwarded to one of the spines to perform as a spine proxy.

It is flooded within the whole fabric.

It is dropped by the leaf when the destination endpoint is not present in the endpoint table.

It is forwarded to one of the APICs to perform as a proxy.

Cisco 300-620 exam is a professional-level certification exam that is designed to test your knowledge and skills in implementing Cisco Application Centric Infrastructure (ACI). Implementing Cisco Application Centric Infrastructure certification exam is ideal for IT professionals who are looking to advance their careers in network infrastructure and data center management. Passing 300-620 exam will demonstrate that you have the expertise required to configure, manage, and troubleshoot ACI environments.

Cisco 300-620 exam is an excellent opportunity for network engineers, architects, and administrators to demonstrate their expertise in deploying and managing Cisco’s ACI solutions. By passing this certification test, candidates can validate their skills, enhance their career prospects, and contribute to the success of their organizations by delivering agile and efficient data center networks.

Start your 300-620 Exam Questions Preparation: https://www.troytecdumps.com/300-620-troytec-exam-dumps.html

High-quality Troytec review files

[UPDATED] Cisco 300-620 Certification Exam Questions [Q215-Q230]

troytecdumps

Leave a Reply Cancel reply

Related Posts

[2026] Practice with these 300-445 dumps Certification Sample Questions [Q22-Q44]

100% Real 300-740 dumps – Brilliant 300-740 Exam Questions PDF [Q24-Q39]

[Aug-2026] 350-101 exam torrent Cisco study guide [Q55-Q70]

troytecdumps

Leave a Reply Cancel reply