2026 Easy Success Cisco 300-540 Exam in First Try [Q51-Q72]

Rate this post

2026 Easy Success Cisco 300-540 Exam in First Try

Best 300-540 Exam Dumps for the Preparation of Latest Exam Questions

NEW QUESTION 51
An engineer must design a cloud platform for managing IaC. The solution must be flexible, integrate with APIs, and allow for automation. What must be used?

 
 
 
 

NEW QUESTION 52
An engineer must enable the highest level of logging when troubleshooting Cisco NFVIS. Which command must be run?

 
 
 
 

NEW QUESTION 53
Control plane high availability within a single VIM is crucial for maintaining __________.

 
 
 
 

NEW QUESTION 54
Which API protocols are preferred for modern network configuration management in NFV? (Choose two)

 
 
 
 

NEW QUESTION 55
Which of the following are key components of network assurance? (Select two)

 
 
 
 

NEW QUESTION 56
An engineer must design a high-availability solution that provides path redundancy for IP by allowing redundant gateways to share MAC protocols and addresses. A group of Layer 3 routers must be allowed to share the default gateway on a LAN, load balance, and seamlessly take over the traffic transfer role if a router in the group fails. What must be used?

 
 
 
 

NEW QUESTION 57
Automatic fault management is crucial for:

 
 
 
 

NEW QUESTION 58
In the context of cloud deployments, hybrid refers to:

 
 
 
 

NEW QUESTION 59

Refer to the exhibit. An engineer must connect switch TOR1 and switch TOR2 to switch LEAF1 and switch LEAF2 by using double-sided vPCs. LEAF1 and LEAF2 are already configured as vPC peers. Which action must be taken next to complete the configuration?

 
 
 
 

NEW QUESTION 60
Virus detectors are crucial for:

 
 
 
 

NEW QUESTION 61
In the context of cloud edge facilities, interconnections are important for:

 
 
 
 

NEW QUESTION 62


Refer to the exhibit. An engineer must configure EVPN port-active multihoming on router R1. Which command must be run against the g1/0 and g1/1 interfaces on R1 to complete the physical Ethernet bundle for multihoming on a host named Host-1?

 
 
 
 

NEW QUESTION 63


Refer to the exhibit. An engineer is troubleshooting an issue where Cisco switch Switch_A fails to establish OTV connectivity to Cisco switch Switch_C. What is the cause of the issue?

 
 
 
 

NEW QUESTION 64

Refer to the exhibit. An engineer must configure redundancy by deploying three Cisco vSmart Controllers in each data center. Which two actions must be taken to configure controllers vSmart1 and vSmart4? (Choose two.)

 
 
 
 
 

NEW QUESTION 65
What is a benefit of a carrier-neutral data center?

 
 
 
 

NEW QUESTION 66
Onboarding VNF refers to:

 
 
 
 

NEW QUESTION 67
Multi-homing is beneficial for:

 
 
 
 

NEW QUESTION 68
The use of Yang models in network configuration is to:

 
 
 
 

NEW QUESTION 69
Cloud edge facilities are designed to:

 
 
 
 

NEW QUESTION 70
A virtual private cloud (VPC) is implemented to provide __________ isolation within a public cloud environment.

 
 
 
 

NEW QUESTION 71
Evaluating WAN infrastructure connectivity, one should consider:

 
 
 
 

NEW QUESTION 72
Which of the following is essential for data plane high availability?

 
 
 
 

Cisco 300-540 Exam Syllabus Topics:

Topic Details
Topic 1
  • Security: This section of the exam measures the skills of Network Security Engineers and covers the implementation of infrastructure-level protection in cloud and NFVI ecosystems. It includes topics such as ACLs, uRPF, RTBH, router hardening, BGP flowspec, TACACS, and MACSEC. Candidates should understand DoS mitigation methods and apply security practices within NFVI, focusing on API protection, securing the control and management plane, and segmentation strategies in service provider cloud environments. The domain also evaluates basic knowledge of TLS, mTLS, and general cloud security solutions related to DNS protection, zero-day defenses, and malware detection.
Topic 2
  • Cloud Interconnect: This section of the exam measures the skills of Service Provider Network Engineers and covers how large networks interconnect with cloud platforms and carrier-neutral facilities. Candidates are expected to understand various connectivity options to cloud providers, customer sites, and other neutral facilities, as well as evaluate WAN connectivity models such as direct connect, MPLS or segment routing, and IPsec VPN links. The domain also includes the ability to troubleshoot advanced data center interconnect solutions, including EVPN VXLAN, EVPN over SR
  • MPLS, ACI-based connectivity, and pseudowire architectures supporting cloud-to-cloud and cloud-to-edge communication.
Topic 3
  • Virtualized Architecture: This section of the exam measures the skills of Cloud Network Engineers and covers the foundational concepts of virtualized infrastructures used in modern service provider and cloud environments. Candidates are expected to understand constraints in IaaS designs, determine appropriate cloud service models, and demonstrate awareness of container orchestration compared to traditional virtual machines. The exam also evaluates the ability to implement key virtualization functions such as NFV, VNF, NSO, and virtualized Cisco platforms. Learners must be able to deploy NFV with automation tools, manage VNF onboarding, work with NSO-driven orchestration, and use protocols like NETCONF, RESTCONF, REST APIs, and gNMI within automated cloud ecosystems. A general understanding of supporting platforms such as OpenStack also forms part of the required knowledge in this domain.
Topic 4
  • High Availability: This section of the exam measures the skills of Cloud Infrastructure Architects and covers the design and implementation of redundancy and resiliency mechanisms in virtualized network functions and distributed cloud platforms. It includes data plane redundancy for VNFs, high availability within a single VIM control plane, and resilient compute, vNIC, and top-of-rack switching. The exam requires an understanding of multi-homing, EVLAG configurations, virtual private cloud deployment, and ECMP strategies for NFVI integrations with physical routing protocols such as BGP, OSPF, and IS-IS. Candidates must also recommend suitable high-availability models involving DNS, routing, and load balancing.
Topic 5
  • Service Assurance and Optimization: This section of the exam measures the skills of Cloud Operations Engineers and covers assurance mechanisms used to maintain performance, stability, and visibility across NFVI environments. It includes network assurance concepts such as MANO frameworks, VNF workload monitoring, VIM control plane KPIs, and streaming telemetry with gRPC and gNMI. Candidates must understand cloud infrastructure performance monitoring tools, including SR-PM, NetFlow, IPFIX, syslog, SNMP traps, RMON, cloud agents, and automated fault management systems. The domain also touches on diagnosing NFVI-related errors and optimizing VNFs using techniques such as SR-IOV and software-accelerated virtual switching technologies like DPDK and VPP.

 

300-540 Study Material, Preparation Guide and PDF Download: https://www.troytecdumps.com/300-540-troytec-exam-dumps.html

Related Links: myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt www.stes.tyc.edu.tw myportal.utt.edu.tt

troytecdumps

Learn More →

Leave a Reply

Your email address will not be published. Required fields are marked *

Enter the text from the image below