EMC DEA-5TT1 Real 2022 Braindumps Mock Exam Dumps

DEA-5TT1 Exam Questions | Real DEA-5TT1 Practice Dumps

Detailed Overview of the Exam Outline

To pass the Dell DEA-5TT1 test successfully, the candidates should gain proficiency in the following topics:

• Ethernet networking;
• Security, authentication, in addition to ACLs;
• Transport layer;
• Technologies for IP routing in addition to routing protocols;
• IP as well as network services;
• IPv4 & v6;

QUESTION 11
On which OSI layers do standard ACL filters operate?

 2 and 3

 2 and 7

 3 and 4

 4 and 7

Explanation
Explanation/Reference:

QUESTION 12
In IPv4, what is the proper conversion from binary to decimal for the number 11010010?

 202

 210

 226

 258

QUESTION 13
Which component translates data, signaling, and protocols to facilitate the data flow between the end device and the network?

 Switch

 Transceiver

 NIC

 Port

QUESTION 14
A VLAN has been configured to have an IPv6 address and a stateless address autoconfiguration for clients. Which IPv6 address prefix will the default gateway have on a client?

 fd01::/64

 fe08::/64

 fe80::/64

 ff02::/8

QUESTION 15
In which Spanning Tree protocol state does a port record MAC addresses but does not forward the data?

 Forwarding

 Blocking

 Learning

 Listening

QUESTION 16
Which criteria is used to define an extended MAC ACL filter?

 Destination MAC address and Ethernet frame type

 Ethernet frame type and frame size

 Destination TCP port number and source MAC address

 Source and destination MAC addresses

QUESTION 17
On which OSI layers do standard ACL filters operate?

 2 and 3

 2 and 7

 3 and 4

 4 and 7

QUESTION 18
At which layer of the OSI model is the Rapid Spanning Tree protocol used to prevent switching loops?

 Physical

 Network

 Data Link

 Transport

QUESTION 19
Which Dell EMC Networking M-Series 10 GbE switch model supports a VLT?

 MXL

 M6220

 M6348

 M8024-K

Reference:
https://i.dell.com/sites/doccontent/shared-content/data-sheets/en/Documents/ PowerEdge_M_Series_Blades_IO_Guide.pdf

QUESTION 20
Which Layer 1 device can be used to enlarge the area covered by a single LAN segment?

 Router

 Repeater

 Switch

 NIC

QUESTION 21
Which topology is considered a best practice when stacking switches?

 Ring

 Cascade

 Serial

 Daisy-chain

QUESTION 22
A network administrator has a Dell EMC switch that has been configured with several VLANs. Each VLAN switch virtual interface (SVI) has an IP address assigned to it with each of them on different subnets. In addition, routing has been enabled on the switch.
Which action occurs when the switch receives a packet on one of its SVIs but the destination IP address of the packet does not match the IP address of that SVI?

 Switch checks its routing table and forwards the packet accordingly.

 Switch duplicates the packet and sends it to all interfaces.

 Switch replies back to the source with an ICMP Reject packet.

 Switch drops the packet.

QUESTION 23
What is the correct sequence of steps that occur in the communications between the client and server to obtain an IP address from a DHCP server?

QUESTION 24
What is the bandwidth of an RPM for a C9010 Network Director?

 200 Mbps

 2.56 Mbps

 1.52 Tbps

 2.56 Tbps

Reference:
http://i.dell.com/sites/doccontent/shared-content/data-sheets/en/documents/ dell_networking_c9000_specsheet.pdf

QUESTION 25
How is a switch different from a hub?

 A switch operates at a lower, more efficient layer of the OSI model.

 A switch tracks MAC addresses of all connected devices.

 A switch decreases the number of broadcast storms.

 A switch does not include any latency into the frame transfer time.

QUESTION 26
What accurately describes the Simple Network Time Protocol (SNTP)?

 Time synchronization algorithms are more complex and account for clock drift.

 Client makes sudden changes in time to keep synchronized.

 Client synchronizes among a set of distributed time servers.

 Implemented on a Dell EMC Network OS 9 and OS 10.

QUESTION 27
Which field of the 802.3 frame is used by network interface cards to synchronize their receivers?

 Start frame delimiter

 Preamble

 Cyclic redundancy check

 Frame check sequence

QUESTION 28
Which platforms are supported by the Dell EMC Networking OS (DNOS) 6?

 N1500 Series switch and N2000 Series switch

 N1700 Series switch and N1500 Series switch

 N1700 Series switch and N3500 Series switch

 N3500 Series switch and N2000 Series switch

Explanation/Reference: https://www.dell.com/en-us/work/shop/povw/networking-os6

QUESTION 29
What accurately describes the comparison between stacking and VLT?

 VLT allows for more physical devices to appear as one virtual device than stacking does.

 Stacked switches share a common control plane while VLT peers maintain their own control plane.

 Stacked switches and VLT peers allow “single pane of glass” management by maintaining a single control plane.

 Both VLT and stacking allow devices to use different versions of firmware provided that the switch family/ series is the same.

Reference:
https://downloads.dell.com/manuals/common/dellemcnetworking_stacking_vs_vlt.pdf Introduction section

QUESTION 30
What is the Organizationally Unique Identifier (OUI) in the MAC address 00:C4:4F:23:AF:4A?

 00:C4:4F

 00:C4:4F:23

 23:AF:4A

 4F:23:AF:4A

QUESTION 31
Refer to the exhibit.

Switch A and Switch B are connected to each other. Both switches use interfaces Gi1/0/1 and Gi1/0/2.
Switch A has a Spanning Tree priority of 8192 and Switch B has the default priority. Which interface becomes the root port?

 Switch A Gi1/0/1

 Switch A Gi1/0/2

 Switch B Gi1/0/1

 Switch B Gi1/0/2

 Loading …

Study Guides for the DEA 5TT1 Exam

Though there are no books that are specific to the test for now, candidates intending to have a go at the DEA-5TT1 exam can make use of the materials that cover the concepts presented in the exam’s outline. With the guides available on Amazon that capture these topics, your awareness of the important domains will grow. Some of the resources to choose from are disclosed further.

• Ethernet: The Definitive Guide

  This essential tool comprehensively looks at the recent Ethernet capacities used to build and maintain networks. It observes various Ethernet technologies, including basic operations as well as network management. It is prepared by Charles E. Spurgeon and Joann Zimmerman. These two professionals have utilized their experience spanning many years to bring out critical matters that include upgrading to faster Ethernet, using switches in building larger networks, and troubleshooting the systems.

  The book is also great in availing guidance on creating scalable networks that utilize Ethernet and ensure they meet greater bandwidth as well as market requirements. By completing it, you will know all the basic elements of Ethernet, will understand how to utilize Ethernet switches in expanding and improving network design, how to boost Ethernet performance, and what are the best troubleshooting techniques.

• Computer Networking: Beginners Guide for Mastering Computer Networking & the OSI Model by Ramon Nastase

  Seeing that the basics of networking is part of the DEA-5TT1 content, this material can offer amazing insights. In the book, the author captures the interconnection of networks within computer systems. Included are basic terms concerning networking such as Ethernet and IP.

  The guide is known to have valuable content for anyone working with small or large networks in the office or even at home, be it a skilled professional or a beginner. The topics covered include the detailed explanation of networks and their functioning, requirements for setting up networks, the definition of Ethernet, the concepts of configuring the IP address, and varied network applications. Other domains involve routing in addition to switching processes and how they work, the use of VLAN within networks, etc. You will also get an opportunity to learn how to perform the correct tasks regarding establishing and maintaining a network.

• Guide to TCP/IP: IPv6 and IPv4

  This ultimate guide by James Pyles, Jeffrey L. Carrell, and Ed Tittel is an introduction to the terminology, concepts, protocols, as well as services used by TCP/IP suite. The importance of the book is in how it covers some aspects related to the DEA-5TT1 exam that include IPv4 as well as IPv6. Students who use it will draw knowledge of the internet protocols and develop necessary skills in interacting with them. Included as well is the subject of troubleshooting, which covers tools needed by network administrators and analysts in ensuring the smooth running of the systems.

• Introduction to Networking: How the Internet Works

  This study guide by Charles Russell Severance, Mauro Toselli, and Sue Blumenberg explains the specifics of the outstanding infrastructure as well as protocols of computers alongside their communication. It covers networks as well as networked applications that we come across every day. Though the topics covered seem to be quite complicated, the book aims to provide the readers with simple and step-by-step explanations that ensure solid information retention. When revising with this material, the candidates will better understand how the internet can be simple to work with when one uses the appropriate resources. Due to such an easy format, the guide can be best for beginners with no background in IT.

Verified DEA-5TT1 Exam Dumps Q&As – Provide DEA-5TT1 with Correct Answers: https://www.troytecdumps.com/DEA-5TT1-troytec-exam-dumps.html

Related Links: myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt