Prepare for the Actual Huawei Specialist H12-731-ENU Exam Practice Materials Collection [Q36-Q60]

4/5 - (1 vote)

Prepare for the Actual Huawei Specialist H12-731-ENU Exam Practice Materials Collection

Huawei Specialist Certified Official Practice Test H12-731-ENU – Sep-2023

Huawei H12-731-ENU certification exam is an important exam for IT professionals who specialize in network security. Passing H12-731-ENU exam is a key step towards achieving the HCIE-Security certification, which can open up many career opportunities in the field of network security. IT professionals who are preparing for H12-731-ENU exam should have a strong background in network security, as well as experience working with Huawei network security products and solutions.

NEW QUESTION 36
When a corporate intranet user accesses the Internet through the USG firewall, a URL has been added to the blacklist, but the user can still access it. What are the possible reasons for the failure of the URL filtering function?

Remote URL list not updated

No URL filtering policy applied in the corresponding inter-domain direction

URL remote query function is not enabled

No URL filtering profile submitted

NEW QUESTION 37
When upgrading the IPS signature database and AV virus database online, it is found that the upgrade fails. During the upgrade operation, the following information is displayed:
Connecting to the security server failure.
The following possible problems are:

Check whether the domain name of the security service center is correct and valid.

Check whether the DNS server configuration is correct and valid.

Licensee not purchased.

IPS or AV engine is abnormal.

NEW QUESTION 38
When using which of the following functions of UTM, it is necessary to ensure that the device is connected to the security service center?

Remote URL Filtering

Scan the transferred files for viruses

Online upgrade of IPS signature library

Online update virus database

Load IPS engine

NEW QUESTION 39
In the dual-system hot-standby network, the service interface works at Layer 3, and the uplink and downlink are connected to the switches:

VGMP management group status is Active, priority is 65001, VGMP management group status is Standby, priority is 65000.

When the link between USG1 and Switch3 is interrupted, the priority of the VGMP management group is reduced by 2.

When the master/slave state switch occurs, the Active device publishes the free VARP of the virtual IP address of the VRRP backup group, and the Standby device also publishes the free ARP.

When USG1 fails or restarts, if USG2 fails to receive VGMP Hello packets sent by USG1 for 5 consecutive times, it considers that USG1 has failed and immediately switches to the master device.

NEW QUESTION 40
Which of the following functional blocks can be used in conjunction with the IP-Link function?

DHCP

Routing Policy

VRRP

OSPF

NEW QUESTION 41
NGFW_A and NGFW_B, NGFW_A and NGFW_C configure static routes respectively. NGFW_A -> NGFW_B is the primary link, NGFW_A -> NGFW_C is the backup link. It is required that the traffic can be quickly switched to the backup link when the primary link fails; the traffic can be switched to the primary chromium road after the primary link is restored.
Which of the following configurations is correct?

[USG_A] bfd
[USG_A] bfd ab bind peer-ip 10.1.1.2
[USG_A-bfd-session-ab] discriminator local 10
[USG_A-bfd-session-ab] discriminator remote 20
[USG_A-bfd-session-ab] commit
[USG_A] ip route-static 0.0.0.0 0 10.1.1.2 track bfd-session ab
[USG_A] ip route-static 0.0.0.0 0 20.1.1.2 preference 100

[USG_A] bfd
[USG_A] bfd ab bind peer-ip 10.1.1.2
[USG_A-bfd-session-ab] discriminator local 10
[USG_A-bfd-session-ab] discriminator remote 20
[USG_A-bfd-session-ab] commit
[USG_A] ip route-static 0.0.0.0 0 10.1.1.2
[USG_A] ip route-static 0.0.0.0 0 20.1.1.2 preference 100 track bfd-session ab

[USG_B] bfd
[BSG_B] bfd ab bind peer-ip 10.1.1.1
[USG_B-bfd-session-ab] discriminator local 20
[USG_B-bfd-session-ab] discriminator remote 10
[USG_B-bfd-session-ab] commit

[USG_B] bfd
[BSG_B] bfd ab bind peer-ip 10.1.1.1
[USG_B-bfd-session-ab] discriminator local 10
[USG_B-bfd-session-ab] discriminator remote 20
[USG_B-bfd-session-ab] commit

NEW QUESTION 42
Which of the following commands are the interface loopback commands needed to handle E1/CE1 problems

loopback

loopback local

loopback remote

test loopback

loopback check

NEW QUESTION 43
The following configuration, when the physical state of interface G0/0/1 goes down, what will happen to the switch switch?
PC —————– (G0/0/1) FW (G0/0/2) —————- Switch
#
interface GigabitEthernet0/0/1
link-group 1
interface GigabitEthernet0/0/2
link-group 1
#

No change.

The ARP entry of the Switch interface address will be aged out.

The ARP entry of the Switch interface address is immediately deleted.

The firewall sends gratuitous ARP to the upstream device Switch to update the MAC address.

NEW QUESTION 44
Which of the following statements about hot standby is correct?

The firewall is connected to the router upstream and connected to the Layer 2 switch downstream. OSPF+VRRP can be used to achieve load balancing.

When the link status detection is enabled, and the incoming and outgoing messages are forwarded by the primary and standby USGs respectively, the USG does not enable rate-determining backup, and the TCP service can pass smoothly.

The default priority of the Active group is 65001, and the default priority of the Standby group is 65000.

The slot numbers of the physical cards of the two devices can be different.

NEW QUESTION 45
Which of the following options can be used as conditions for Portal push ?

Endpoint IP address range

Terminal browser type

Terminal device type

SSID of the access AP

MAC address of the access AP

MAC address of the connected AC

NEW QUESTION 46
The main differences between the RADIUS and HWTACACS protocols include:

RADIUS uses TCP protocol, network transmission is more reliable, HWTACACS uses UDP protocol.

HWTACACS encrypts the entire body of the message, and RADIUS only encrypts the password field in the authentication message.

RADIUS authentication and authorization are separated, and HWTACACS authentication and authorization are processed together.

HWTACACS supports authorization of configuration commands, RADIUS does not support authorization of configuration commands.

NEW QUESTION 47
The IPsecVPN tunnel is successfully established, but the speed of accessing the peer’s private network web page is slow or the access is intermittent. The influence of the Internet network quality has been ruled out. The following possible faults are:

The problem of packet fragmentation

The CPU usage of the egress gateway is too high

There is a NAT device in the middle of the network

Packet filtering policy is not enabled

NEW QUESTION 48
For the networking shown in the figure, one end of the IPsec tunnel uses two devices for dual-system hot backup. When the master-slave switchover occurs, which of the following descriptions is correct?

The IPsec tunnel does not require renegotiation.

Packets from USG_C to HQ will trigger renegotiation, and services will not be affected.

Configure the dpd mechanism on USG_A, USG_B, and USG_C to increase the reliability of IPsec dual-system hot backup.

The Keepalive mechanism consumes less CPU resources than the DPD mechanism.

NEW QUESTION 49
As shown in the figure, which illustrates the negotiation process of IPsec, which of the following descriptions are correct?

This process is an IKEv2 negotiation process.

The red boxed part is the EAP authentication process.

①② Refers to the two parties negotiating the data flow to be protected and the IPsec security proposal.

The red box is a mandatory negotiation process

NEW QUESTION 50
The anti-spam function of Huawei firewall uses the RBL method. What are the requirements for the DNS server?

This DNS must be a server that is not hijacked by DNS.

This DNS must be a server using a recursive algorithm.

This DNS must be a server using an iterative algorithm.

When no DNS server is specified, the DNS server configured in system mode is used.

NEW QUESTION 51
Which of the following descriptions are correct about the way SAC devices are connected to the network?

SACG equipment is required to communicate with the terminal at Layer 2.

SACG is usually side-mounted on the core switch device and uses policy routing to divert traffic.

SACG supports side-hook on non-Huawei devices.

SACG devices are required to communicate with the Agile Controller at Layer 2.

NEW QUESTION 52
Which of the following options is not part of the visitor management process?

page customization

Account Application

Account Approval

The account is automatically offline

Account authorization

Internet Behavior Audit

NEW QUESTION 53
Comparing the two technologies of mail content filtering and RBL filtering, the correct statement is:

Mail Content Filtering supports filtering of webmail or mail transmitted via SMTP/POP3.

RBL filtering only filters messages sent by male POP3.

Mail content filtering Filters the mail content.

RBL filtering is based on the destination IP address of the SMTP connection.

NEW QUESTION 54
As shown in the figure, the routing example between the virtual firewall vpn1 and the root firewall needs to be configured.
Which of the following is correct:

[USG-vpn1] ip route-static 202.168.10.0 255.255.255.0 public [USG] ip route-static 10.1.1.0 255.255.255.0 vpn-instance vpn1 10.1.2.2.2 [USG] ip route-static 202.168 .10.0 255.255.255.0 250.168.20.3

[USG-vpn1] ip route-static 202.168.10.0 255.255.255.0 202.168.20.3 [USG] ip route-static 10.1.1.0 255.255.255.0 vpn-instance vpn1 10.1.2.2.2

[USG-vpn1] ip route-static 202.168.10.0 255.255.255.0 202.168.20.3 vpn-instance vpn1 [USG] ip route-static 10.1.1.0 255.255.255.0 vpn-instance vpn1 10.1.2.2.2

[USG-vpn1] ip route-static 202.168.10.0 255.255.255.0 202.168.20.3 public [USG] ip route-static 10.1.1.0 255.255.255.0 10.1.2.2.2

NEW QUESTION 55
In order to ensure the normal operation of the device and prevent security threats, it is necessary to strengthen the security of the device. The correct consideration is:

The security policy from Untrust, Trust, DMZ zone to Local zone only opens ports that allow ICMP, SSH login, SNMP, etc.

SNMPv2 version and network management communication.

Set the console password, and set the login timeout and authentication times limit of the administrator interface.

Use Telnet protocol for device management.

NEW QUESTION 56
IKE V1 – Phase negotiation is unsuccessful, what information needs to be checked, and what may be the reasons?

Check whether the physical link is normal.

View IKE debug information and UDP port 500 packet session statistics.

Check if the ACL configuration matches.

Check the IPsec proposal parameter configuration.

NEW QUESTION 57
There are multiple real servers in an enterprise network that provide FTP services to the outside world, and the load balancing function is configured to ensure the load balancing of traffic flowing through the USG.
The administrator hopes that by detecting the real server status, the load ratio of each server is the same as the weight ratio. The following suitable configurations are:

# Configure the real server to join the negative balance group. [USG-slb] group test [USG-slb-group-test] metric least-connection [USG-slb-group-test] addrserver 1 [USG-slb-group-test] addrserver 2 [USG-slb-group-test] ] addrserver 3 [USG-slb-group-test] quit

# Configure the real server to join the negative balance group. [USG-slb] group test [USG-slb-group-test] metric roundrobin [USG-slb-group-test] addrserver 1 [USG-slb-group-test] addrserver 2 [USG-slb-group-test] addrserver 3 [USG-slb-group-test] quit

# Configure the real server to join the negative balance group. [USG-slb] group test [USG-slb-group-test] metric srchash [USG-slb-group-test] addrserver 1 [USG-slb-group-test] addrserver 2 [USG-slb-group-test] addrserver 3 [USG-slb-group-test] quit

# Configure the real server to join the negative balance group. [USG-slb] group test [USG-slb-group-test] metric weightrr [USG-slb-group-test] addrserver 1 [USG-slb-group-test] addrserver 2 [USG-slb-group-test] addrserver 3 [USG-slb-group-test] quit

NEW QUESTION 58
The following HWTACACS configuration has been made on the firewall:
<sysname> system-view
[sysname] hwtacacs-server template server1
[sysname-hwtacacs-server1] hwtacacs-server authentication 3.3.3.3 10000
[sysname-hwtacacs-server1] hwtacacs-server accounting 3.3.3.3 10010
Please point out the problem in this configuration:

The port number used by the configured authentication server is incorrect.

The port number used to configure the accounting server is incorrect.

Authentication and accounting servers should not use the same IP address.

The authorization server is not configured.

NEW QUESTION 59
Which route distribution modes does the SSL VPN network extension support?

full routing mode ( full )

Manual mode ( manual )

automatic mode ( auto )

dynamic mode ( dynamic )

split mode ( split )

NEW QUESTION 60
Which of the following functions are functions of SSL VPN?

port forwarding

port mapping

network extension

file proxy

Web Proxy

Huawei H12-731-ENU is an exam that is designed for professionals who are interested in pursuing a career in network security. H12-731-ENU exam is referred to as HCIE-Security (Huawei Certified Internetwork Expert-Security) and is one of the most sought-after certifications in the IT industry. Huawei is a leading provider of networking and telecommunications equipment, and this certification is a testament to the expertise of the individual in network security.

Ace Huawei H12-731-ENU Certification with Actual Questions Sep 07, 2023 Updated: https://www.troytecdumps.com/H12-731-ENU-troytec-exam-dumps.html

High-quality Troytec review files

Prepare for the Actual Huawei Specialist H12-731-ENU Exam Practice Materials Collection [Q36-Q60]

troytecdumps

Leave a Reply Cancel reply

Related Posts

H12-711_V4.0 Tested & Approved Huawei Certified ICT Associate Study Materials [Q19-Q37]

Get Instant Access to H19-401_V2.0 Practice Exam Questions [Q39-Q61]

Get Special Discount Offer of H19-308-ENU Certification Exam Sample Questions and Answers [Q69-Q86]

troytecdumps

Leave a Reply Cancel reply