C_IBP_2111 Updated Exam Dumps [2022] Practice Valid Exam Dumps Question [Q12-Q30]

Rate this post

C_IBP_2111 Updated Exam Dumps [2022] Practice Valid Exam Dumps Question

C_IBP_2111 Sample with Accurate & Updated Questions

QUESTION 12
Which of the following data can be tracked using a change-history-enabled key figure? Note: There are 3 correct Answers to this question.

Reason code

Scenario ID

Attributes

Key figure type

Modified date

QUESTION 13
Which of the following approaches could you take to reduce run times of an optimizer? Note: There are
2 correct Answers to this question.

Use a subnetwork ID to reduce the size of the problem.

Split into multiple planning areas to support weekly vs. daily planning needs.

Avoid using telescopic time buckets.

Increase the use of incremental lot size beyond the frozen horizon.

QUESTION 14
While modeling for a large machine with high capital needs, you need it to run cost effectively with minimum utilization, even if it means producing more than demand. Which solution would apply to this scenario? Note:
There are 2 correct Answers to this question.

Capacity leveling will be possible for production and storage resources.

Excess stock can be generated and will need to be staged in an overflow warehouse.

Enough demands can be pulled forward and pull production will occur.

Balance can be achieved between excessive prebuild and minimum utilization by incorporating violation costs.

QUESTION 15
Where can we see the results of Time Series analysis in SAP IBP?

Time Series Property Attribute in Customer Source

Time Series Property Attribute in Customer Product

Time Series Property Attribute in Customer

Time Series Property Attribute in Product

QUESTION 16
You have set up infinite S&OP heuristics for unconstrained planning. What must you do to model inputs as constraints? Note: There are 2 correct Answers to this question.

Enter transportation lead times.

Model adjusted transport receipts.

Create product substitutions.

Set minimum and maximum lot sizes.

QUESTION 17
What is a prerequisite for modeling outsourced manufacturers with production capacity?

Model production costs for internal and external production resources to model priority.

Model target inventory and stocks at the outsourced location.

Ensure that multiple modes of transportation are set up.

Use production lead times and offsets to manage components at the outsourced location.

QUESTION 18
Which of the following are the key features of SAP Supply Chain Control Tower? Note: There are 2 correct Answers to this question.

Ability to balance demand and supply and attain financial targets

Ability to create a feasible plan

Ability to use task and case management

Ability to create smart alerts

QUESTION 19
Which conditions are prerequisites for key figure disaggregation?

The key figure is calculated and editable.

The key figure is calculated and aggregation mode is selected.

The key figure is set to Not Editable.

The key figure is stored and editable.

QUESTION 20
How can you check if key figure is editable or non-editable?

Using the Web-based Planning app when selecting key figures

Using the Key Figure Calculations app

Using the Edit View and then the Edit Planning View option

Using the Analytics Advanced app when selecting key figures

QUESTION 21
How many different time levels can be selected within one planning view?

All time levels available in the time profile

All time levels available in the time profile, restricted by global configuration parameter

Only time levels from the base planning level of selected key figures

Only base time levels of the planning area

QUESTION 22
You created a key figure and want to add calculations. Which of the following rules do you consider?
Note: There are 2 correct Answers to this question.

All key figure calculations have calculation inputs, which can be marked as stored or calculated.

The calculation chain for a key figure must always result in a calculated key figure.

Aggregation calculations using SUM or MAX functions must be based on a higher aggregation level.

Key figures can be calculated across different planning levels.

QUESTION 23
You want to set up demand sensing to analyze demand changes in execution or close to execution windows. Which of the following conditions must you consider during the setup? Note: There are 2 correct Answers to this question.

At setup test the system to run the demand sensing (full) algorithm weekly and the demand sensing (update) on a daily basis.

The result generates sensed demand data at the monthly time granularity for the full time horizon.

Set up the forecast model to be executed at product-location level.

It is mandatory to load historical lag-based snapshot data.

QUESTION 24
You are working on a mid-range plan that spans the seasonal peak and you are evaluating the need for additional crewing. Which of the following parameters can you model to plan production with extra shift(s)?

Incremental production values

Capacity expansion with additional costs

Production source validity at the start of seasonal peak

Adjusted production interactive values

QUESTION 25
What actions can be performed in the Advanced Dashboards application? Note: There are 3 correct Answers to this question.

Rename the charts.

Add process templates.

Organize charts.

Display all assigned analytics on a single UI.

Link two analytics charts.

QUESTION 26
NO.23 You are redesigning planning for supply chain that is facing the issue of variability. What is the best solution for dampening variability via demand classification?

SAP IBP for Demand

SAP IBP for Demand Driven Replenishment

SAP IBP for Inventory

SAP IBP for Sales and Operations Planning

QUESTION 27
Which of the following are features of lag-based snapshots? Note: There are 2 correct Answers to this question.

Target key figures for these snapshots are exposed to the user in planning views.

Lag-based snapshots are created in the Configuration app for a fixed time range.

Target key figures for these snapshots must have lag as a root attribute.

Lag-based snapshots are automatically assigned to a snapshot operator.

QUESTION 28
Which of the following conditions are relevant for subtotals in the planning view? Note: There are 2 correct Answers to this question.

Only attribute-based totals can be added to the planning view.

The total value can be added before or after the selected attribute.

The values of the attribute-based total at the highest attribute level in the planning level can be changed.

The total number of attributes that can use subtotals in the planning view can be restricted.

QUESTION 29
Which of the following functional areas are included in the out-of-the-box SAP Integrated Business Planning application for sales and operations? Note: There are 3 correct Answers to this question.

Executive review

Demand-driven materials requirement planning

Rough-cut supply planning

Consensus demand planning

Finite resource capacities planning

QUESTION 30
You have set up a planning area and data is available. You adjust the necessary time profile settings and run the consistency check. Which settings can you change and still run a successful consistency check?
Note: There are 2 correct Answers to this question.

Change the past and future horizon of the levels in the time profile.

Remove an attribute assigned to the time profile level if the attribute is used in a planning level.

Add a new time profile level to the time profile.

Change the description of the attributes in the time profile.

Loading …

SAP C_IBP_2111 Exam Syllabus Topics:

Topic	Details
Topic 1	Create statistical forecast using historical data with basic methods Use the Fiori Launchpad to customize the UI, work with Excel UI
Topic 2	Planning Operators & Application Jobs Use Planning Operators
Topic 3	Optimize inventory in the supply chain utilizing algorithms that derive inventory targets
Topic 4	Describe how IBP extends the logic of S&OP in the network using advanced demand and supply planning integrated with financial plans
Topic 5	Describe the benefits of implementing SAP’s Integrated Business Planning solution Demand Planning. Solution Architecture. S&OP Review
Topic 6	Create and use key figures and attributes Key Figures & Attributes
Topic 7	Define and view information with user-defined charts and dashboards Analytics and Reporting

Pass SAP C_IBP_2111 Premium Files Test Engine pdf – Free Dumps Collection: https://www.troytecdumps.com/C_IBP_2111-troytec-exam-dumps.html

High-quality Troytec review files

C_IBP_2111 Updated Exam Dumps [2022] Practice Valid Exam Dumps Question [Q12-Q30]

SAP C_IBP_2111 Exam Syllabus Topics:

troytecdumps

Leave a Reply Cancel reply

SAP C_IBP_2111 Exam Syllabus Topics:

Related Posts

Best C_S4PM Exam Dumps for the Preparation of Latest Exam Questions [Q50-Q72]

Real C_TS452_2601 dumps Accurate Questions and Answers with Free and Fast Updates [Q83-Q98]

C_ACDET Actual Questions Answers Pass With Real C_ACDET Exam Dumps [Q14-Q35]

troytecdumps

Leave a Reply Cancel reply