2023 Correct and Up-to-date Cisco 350-401 BrainDumps [Q155-Q176]

4.7/5 - (3 votes)

2023 Correct and Up-to-date Cisco 350-401 BrainDumps

Current 350-401 dumps Preparation through Our Practice Test

What are the prestigious career opportunities?

With CCIE Enterprise Infrastructure, CCIE Enterprise Wireless, and/or CCNP Enterprise under your belt, you can boost your career to a higher level. Thus, the certified professionals can take up various positions, including an Enterprise IT Infrastructure Architect, an Infrastructure Automation Engineer, a Director of Infrastructure, an IT Infrastructure Security Engineer, a Senior Enterprise Architect, a CCIE Consultant, a Principal Wireless Network Engineer, an Infrastructure Solutions Architect, and many more. The average salary can be up to $120,000 per year, depending on your job role, related tasks, and working experience.

NO.155 In a Cisco StackWise Virtual environment, which planes are virtually combined in the common logical switch?

management and data

control and management

control, and forwarding

control and data

NO.156 Which protocol infers that a YANG data model is being used?

SNMP

NX-API

REST

RESTCONF

NO.157 After a redundant route processor failure occurs on a Layer 3 device, which mechanism allows for packets to be forwarded from a neighboring router based on the most recent tables?

RPVST+

NSF

BFD

RP failover

NO.158 Refer to the exhibit.

What is required to configure a second export destination for IP address 192.168.10.1?

Specify a VRF.

Specify a different UDP port.

Specify a different flow ID

Configure a version 5 flow-export to the same destination.

Specify a different TCP port.

NO.159 Refer to the exhibit.

A network engineer configures OSPF and reviews the router configuration. Which interface or interface or interface are able to establish OSPF adjacency?

GigabitEthemet0/1 and GigabitEthernet0/1.40

only GigabitEthernet0/1

only GigabttEthernet0/0

Gigabit Ethernet0/0 and GigabitEthemet0/1

NO.160 Refer to the exhibit.

An engineer must block all traffic from a router to its directly connected subnet 209.165.200.0/24. The engineer applies access control list EGRESS in the outbound direction on the GigabitEthernet0/0 interface of the router However, the router can still ping hosts on the 209.165.200.0/24 subnet. Which explanation of this behavior is true?

Access control lists that are applied outbound to a router interface do not affect traffic that is sourced from the router.

Only standard access control lists can block traffic from a source IP address.

After an access control list is applied to an interface, that interface must be shut and no shut for the access control list to take effect.

The access control list must contain an explicit deny to block traffic from the router.

NO.161 Refer to the exhibit.

What does the snippet of code achieve?

It creates a temporary connection to a Cisco Nexus device and retrieves a token to be used for API calls.

It opens a tunnel and encapsulates the login information, if the host key is correct.

It opens an ncclient connection to a Cisco Nexus device and maintains it for the duration of the context.

It creates an SSH connection using the SSH key that is stored, and the password is ignored.

NO.162 Refer to the exhibit.

Which configuration must be applied to R1 to enable R1 to reach the server at 172.16.0.1?

Option A

Option B

Option C

Option D

NO.163

Company policy restricts VLAN 10 to be allowed only on SW1 and SW2. All other VLANs can be on all three switches. An administrator has noticed that VLAN 10 has propagated to SW3. Which configuration corrects the issue?
A)

B)

C)

D)

Option A

Option B

Option C

Option D

NO.164 Drag and drop the characteristics from the left onto the correct infrastructure deployment types on the right.

NO.165 An engineer is configuring RADIUS-Based Authentication with EAP MS-CHAPv2 is configured on a client device.
Which outer method protocol must be configured on the ISE to support this authentication type?

EAP-TLS

PEAP

LDAP

EAP-FAST

NO.166 In a Cisco SD-Access solution, what is the role of the Identity Services Engine?

It is leveraged for dynamic endpoint to group mapping and policy definition.

It provides GUI management and abstraction via apps that share context.

it is used to analyze endpoint to app flows and monitor fabric status.

It manages the LISP EID database.

NO.167 Based on this interface configuration, what is the expected state of OSPF adjacency?

Full on both routers

not established

2WAY/DROTHER on both routers

FULL/BDR on R1 and FULL/BDR on R2

NO.168 Drag and drop the characteristics from the left onto the routing protocols they describe on the right.

NO.169 Refer to the exhibit.

Which command set must be added to the configuration to analyze 50 packets out of every 100?

Option A

Option B

Option C

Option D

NO.170 Drag and drop the LISP components from the left onto the function they perform on the right. Not all options are used.

NO.171 Which statement explains why Type 1 hypervisor is considered more efficient than Type 2 hypervisor?

Type 1 hypervisor runs directly on the physical hardware of the host machine without relying on the underlying OS.

Type 1 hypervisor enables other operating systems to run on it.

Type 1 hypervisor relics on the existing OS of the host machine to access CPU, memory, storage, and network resources.

Type 1 hypervisor is the only type of hypervisor that supports hardware acceleration techniques.

NO.172 Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?

Permit 10.0.0.0.0.0.0.1

Permit 10.0.0.1.0.0.0.0

Permit 10.0.0.1.0.0.0.254

Permit 10.0.0.0.255.255.255.254

NO.173 Which action is a function of VTEP in VXLAN?

tunneling traffic from IPv6 to IPv4 VXLANs

allowing encrypted communication on the local VXLAN Ethernet segment

encapsulating and de-encapsulating VXLAN Ethernet frames

tunneling traffic from IPv4 to IPv6 VXLANs

NO.174 Drag and drop the LISP components from the left onto the function they perform on the right. Not all options are used.

NO.175 Refer to the exhibit.

An engineer configures monitoring on SW1 and enters the show command to verify operation. What does the output confirm?

SPAN session 1 monitors activity on VLAN 50 of a remote switch

SPAN session 2 only monitors egress traffic exiting port FastEthernet 0/14.

SPAN session 2 monitors all traffic entering and exiting port FastEthernet 0/15.

RSPAN session 1 is incompletely configured for monitoring

NO.176 Refer to the exhibit.

A network engineer is configuring OSPF between router R1 and router R2. The engineer must ensure that a DR/BDR election does not occur on the Gigabit Ethernet interfaces in area 0. Which configuration set accomplishes this goal?
A)

B)

C)

D)