[Nov-2023] Latest Nokia 4A0-205 exam dumps and online Test Engine [Q22-Q38]

Rate this post

[Nov-2023] Latest Nokia 4A0-205 exam dumps and online Test Engine

Nokia 4A0-205: Selling Nokia Optical Network Professional Products and Solutions

NO.22 Is it possible to open and manage EPT designs that are created with different releases than the release installed on the local workstation?

Only designs created with the current release can be opened and edited.

Only designs created with current and older releases can be opened and edited.

Designs created with an older release can be opened by a current release but cannot make changes.

No restrictions are imposed on the software release.

NO.23 Is it possible to select the fiber type independently for each segment while designing a network in EPT?

Yes, during the link creation through the wizard

No, a unique type is allowed per design for all segments

No, as the fiber type is selected for links only and it’s one for whole design

Yes, during the segment creation phase or editing

NO.24 Which macro steps can be executed via CPB?

Node creation, systems validation and system provisioning

Power adjustment and generation of the system loss report

Systems validation, system provisioning, power adjustment

Node supervision, system validation and system provision

NO.25 Which of the following statements is true?

Logs report both active and historical events.

Alarms and conditions report a real time status of the node.

Alarms and conditions report only historical status of the node.

Logs report a real time status of the node.

NO.26 How are the EPT systems related to NFM-T when CPB is performed?

The systems are not reported on CPB, as this Is transparent to the user and the whole network is validated and provisioned in one step

The systems are displayed on the CPB panel, however they cannot be individually selected as they need to run all together

The systems are displayed on the CPB panel and they can be individually selected

The systems are not reported on CPB, but only through the Equipment Manager

NO.27 Which statement is correct about the NFM-T network map?

It automatically represents all nodes grouped by the location string assigned during the NE creation.

It represents all supervised nodes grouped by alarm status (with a different color).

It allows context sensitive navigation and represents nodes and related physical connections with different colors. depending on the active alarms.

It allows the graphical visualization of the services deployed in the network with the details of the boards involved in the service.

NO.28 Which of the following applications is related to Wavelength Tracker tool?

Collecting logs related to possible issue affecting a wavelength path

Tracking the protection path for a specific wavelength

Tracing the end-to-end wavelength optical power

Correcting errors related to wavelength inconsistencies

NO.29 What is the purpose of the validate step in the EPT design process?

During this step, the configuration available on the involved network elements is compared with the design provided by EPT.

This step is used to measure optical power performances over an existing network before making changes.

This step is optional and is useful to verify the network element layout before going through the commission step.

During this step, the run design action is triggered for network design consistency check and errors fixing.

NO.30 In which window(s) does the attenuation reach its minimum peak?

First window (850 nm)

Second window (1300 nm)

Third window (1550 nm)

Both first and second windows

NO.31 What is a Shared Risk Group (SRG)?

A set of fibers that share the same latency risk

A set of boards that share the same failure risk

A set of nodes that share a common risk of hardware failure

A set of network resources that share a common failure risk

NO.32 When monitoring the quality of the received signal in WDM, an open eye indicates:

Low noise

High distortion

High jitter

Presence of high inter-symbolic interference

NO.33 A user needs to check for interface details against the commands is the correct one?

config interface detail 1/17/L1

config card 11star1a interface 1/17 detail

show interface 11starla 1/17/L1 detail

11starla 1/17 port-detail

NO.34 How is it possible to check the activation status of GMRE on a node?

The GMRE reachability can be tested via ping request from NFM-T

The ControlPlane status column on the node list displays the GMRE status for the selected node

The GMRE activation status is reported in the supervision state column on the node list

The GMRE activation status is reflected on the color of the icon representing the node

NO.35 Which sentence about NFM-T is correct?

NFM-T fully supports LO, LI, L2 and GMPLS applications and it is mainly focused on 1830 PSS, as well as other older product families

NFM-T fully supports optical and IP nodes

NFM-T is used to design and manage optical network

NFM-T is used to provision optical services having IP nodes as extremities

NO.36 What does it take to get connected to the NSP platform?

A browser and the NSP IP address; and from the landing page, the NSP application should be downloaded and launched.

A browser and the NSP IP address. Then, a browser plugin needs to be installed and the laptop rebooted before the NSP can be correctly reached.

A browser, the NSP IP address, and the credentials to access the web-based interface (WebUI).

The NSP package should be downloaded from the Nokia website and properly licensed for the specific workstation to be used.

NO.37 Is it possible to mix PSS-24x and PSS-8x shelves In an SWDM configuration?

Yes, as both can be equipped within the same node

No, as they are not compatible and cannot be used within the same node

Yes, but the PSS-24X shelf must be configured as a master

Yes, but the PSS-8X shelf must be configured as a master

NO.38 What is a degree-1 node?

A node with only one direction and therefore a terminal node

A node with only one express channel and therefore made of two sides

A node with only east and west sides without directions towards north and south

A node with one direction only and therefore used as In-Line-Amplifier (ILA)

Nokia 4A0-205 exam consists of 60 questions and must be completed within 90 minutes. 4A0-205 exam format includes multiple-choice questions, drag and drop questions, and matching questions. To pass the exam, candidates must achieve a score of at least 70%.

New 2023 4A0-205 Test Tutorial (Updated 42 Questions): https://www.troytecdumps.com/4A0-205-troytec-exam-dumps.html

High-quality Troytec review files

[Nov-2023] Latest Nokia 4A0-205 exam dumps and online Test Engine [Q22-Q38]

troytecdumps

Leave a Reply Cancel reply

Related Posts

Aug 19, 2026 Detailed New 4A0-F10 Exam Questions for Concept Clearance [Q11-Q27]

4A0-F10 Dumps Updated Jul 29, 2026 Practice Test and 43 unique questions [Q23-Q40]

4A0-220 Revolutionary Guide To Exam Nokia Dumps [Q10-Q28]

troytecdumps

Leave a Reply Cancel reply