HPE Product Certified – OneView [2022] HPE2-T37 Exam Dumps and Certification Test Engine [Q15-Q39]

4.5/5 - (2 votes)

(PDF) HPE Product Certified – OneView [2022] HPE2-T37 Exam and Certification Test Engine

Use HPE2-T37 Exam Dumps (2024 PDF Dumps) To Have Reliable HPE2-T37 Test Engine

NEW QUESTION 15
Which operation can be performed using HPE OneView for VMware vCenter Server?

Remove a new node from an existing cluster

Create a new VMware cluster within vCenter Server

Configure VMware cluster properties tor HA and DRS

Create a new distributed switch for cluster connectivity

NEW QUESTION 16
What is a network set?

It is a collection of all internal networks defined for a specific type of traffic like vSAN or vMotion.

It is a collection of untagged Ethernet networks that form a named group to simplify server profile creation.

It is a collection of tagged Ethernet networks that form a named group to simplify server profile creation.

It is a collection of all networks configured within HPE OneView regardless of network type.

NEW QUESTION 17
Which statement about an HPE OneView server profile is true?

A server profile can be created only for HPE BladeSystem, HPE Synergy, and HPE Superdome Flex servers.

A server profile created for a specific server hardware type cannot be moved to a server with a different server hardware type.

A server profile can be used to configure a local storage controller, but cannot be used to configure SAN-based storage.

A server profile can be used to update firmware and drivers when the operating system on the server is up and running.

NEW QUESTION 18
Where is the association between an HPE OneView network and uplink port defined?

Within an Enclosure Group definition

Within an HPE OneView network definition

At the network set level

At the Logical Interconnect Group level

NEW QUESTION 19
Your customer built a sever profile for HPE Synergy Gen 10 server and configured boot mode to Legacy BIOS.
Which feature Is not available for this Compute Module?

BIOS management

Workload profile

Boot from SAN

Secure boot

NEW QUESTION 20
Which statement about logical JBODs configured using KPE OneView and D3940 Storage Modules is true?

A logical JBOD lifecycle can be associated with a server profile lifecycle and drives can be securely erased.

A logical JBOD cannot be created during server profile creation and must be prepared in advance

Different types of the drives can be used within a logical JBOD as long as they have the same capacity

Logical JBOD functionality must be enabled on the Enclosure Group level by a storage administrator

NEW QUESTION 21
Why would you install an HPE OneView corticate to HPE BladeSystem Onboard Administrator?

to enable single sign-on functionality

to enable automatic firmware management

to enable licenses management

to enable access to REST API features

NEW QUESTION 22
Your customer is considering HPE Synergy as a hardware platform for visualization workload. The customer environment is wry dynamic, and they often have to modify hypervisor networking.
Which resource provided by HPE should you discuss with this customer?

HPE OneView Global Dashboard allows server profile replication and change management.

PowerShell Library for HPE OneView allows scripted environment modification.

HPE OneView for VMware vCenter Server will enable host profile functionality and simplify changes.

HPE Image Streamer provides templates which can be updated to map the hypervisor requirements

NEW QUESTION 23
HOTSPOT
Click the option that will prevent the appliance from sending any email notifications or forwarding any SNMP traps that are related to the server hardware.

NEW QUESTION 24
Which components require an HPE OneView license for management?

HPE Virtual Connect modules

HPE Apollo XL 170r

Brocade and Cisco SAN Manager

HPE Primera and HPE 3PAR

NEW QUESTION 25
Which operation can be performed using HPE OneView for VMware vCenter Server?

Remove a new node from an existing cluster

Create a new VMware cluster within vCenter Server

Configure VMware cluster properties tor HA and DRS

Create a new distributed switch for cluster connectivity

NEW QUESTION 26
Which statement is true about volumes created through a server profile?

data reduction cannot be enabled for this volume

only private volumes can be created

a volume template must be used for provisioning

this volume can be only used as a boot volume

NEW QUESTION 27
For HPE Primera, match each task with the management tool that can be used to perform it.

NEW QUESTION 28
Click the option that will prevent the appliance from sending any email notifications or forwarding any SNMP traps that are related to the server hardware.

NEW QUESTION 29
Match each type of HPE OneView network with its appropriate description.

NEW QUESTION 30
What is a network set?

It is a collection of all internal networks defined for a specific type of traffic like vSAN or vMotion.

It is a collection of untagged Ethernet networks that form a named group to simplify server profile creation.

It is a collection of tagged Ethernet networks that form a named group to simplify server profile creation.

It is a collection of all networks configured within HPE OneView regardless of network type.

NEW QUESTION 31
Refer to the exhibit.

Your customer created multiple networks in HPE OneView, but only Eth-1 is available to be used within a server profile.
What is a likely cause of this situation?

The other networks are not configured with the required Smart Link parameter.

The other networks are not added to the Logical Interconnect Group configuration.

The other networks have Private Network’ selected, which hides them from ComputeModules.

The other networks are configured with a purpose other than General or Management.

NEW QUESTION 32
How can your customer implement HPE OneView so that it can be used to manage an HPE ProLiant server and HPE BladeSystem?

As an application running on the server with Windows system.

As a physical appliance based on HPE ProLiant 360 Gen 10.

As an application running on the server with CentOS Linux system

As a virtual appliance running on the supported hypervisor.

NEW QUESTION 33
You have created volumes using array management tools and imported the volumes to HPE OneView.
Which statement about these volumes is true?

Imported volumes are treated as private volumes and can be only used boot volumes

Volumes imported to HPE OneView is managed just like a volume created using HPE OneView

Volumes imported to HPE OneView cannot be removed using the HPE OneView interface

A snapshot for imported volumes can be ceated only by using array management tools

NEW QUESTION 34
Refer to the exhibit.

You discovered that one of the profiles is not compliant with the server profile template. What could cause this profile to be inconsistent with the server profile template?

The server was powered off or rebooted recently and IL0 did not reconnect to HPE OneView.

HPE OneView was restored from a backup that created ^consistency with the server profile template.

Network connectivity for HPE Synergy Compute Module was changed outside HPE OneView.

Changes to the server profile were implemented directly on the server profile.

NEW QUESTION 35
HOTSPOT
Click the option that must be configured for an HPE OneView when an HPE storage system is connected directly to an HPE Synergy frame.

NEW QUESTION 36
As a part of troubleshooting, you have to reinstall the same version of the firmware on an HPE Synergy Compute Module. Click the area within the Firmware section of the server profile that will allow you to install the same firmware version.

NEW QUESTION 37
How can your customer implement HPE OneView so that it can be used to manage an HPE ProLiant server and HPE BladeSystem?

As an application running on the server with Windows system.

As a physical appliance based on HPE ProLiant 360 Gen 10.

As an application running on the server with CentOS Linux system

As a virtual appliance running on the supported hypervisor.

NEW QUESTION 38
Within HPE OneView you can configure SNMPv1 read community string.
What is the purpose of this feature?

This is an SNMP community string that will be used when traps are forwarded to a WBEM Provider

This is an SNMP community string that will be used when traps are forwarded to other SNMP applications

This is an SNMP community string that will be used to receive a trap’s SNMP Agent

This is an SNMP community string that will be used to receive traps from HPE Onboard Administrators

NEW QUESTION 39
You ate implementing an HPE Synergy solution with multiple frames in one management ring. Image Streamer is not a part of this solution. How can an IPv4 address pool defined by the administrator be used In HPE OneView?

to provide static IP addresses to IL0 and interconnect modules if applicable

to provide static IP addresses for an operating system running on a Compute Module

to provide static IP addresses for Logical Interconnects and Logical Enclosures

to provide static IP addresses for storage systems managed in HPE OneView

HPE2-T37 Dumps Full Questions with Free PDF Questions to Pass: https://www.troytecdumps.com/HPE2-T37-troytec-exam-dumps.html

High-quality Troytec review files

HPE Product Certified – OneView [2022] HPE2-T37 Exam Dumps and Certification Test Engine [Q15-Q39]

troytecdumps

Leave a Reply Cancel reply

Related Posts

[2026] Use Real HP Dumps – 100% Free HPE7-A01 Exam Dumps [Q45-Q59]

HPE6-A90 Dumps PDF – HPE6-A90 Real Exam Questions Answers [Q34-Q49]

Quality HPE7-A11 PDF Dumps – HPE7-A11 Exam Questions [Q42-Q66]

troytecdumps

Leave a Reply Cancel reply