NO.39 A customer has one large aggregate over several shelves, and only one shelf has reached End of Support (EoS) and needs to be evacuated. The installation engineer already added a new shelf and assigned the disks with same type and size. Which NetApp ONTAP command is used to copy the data from disk to disk?

NO.40 A system is in a boot loop, and the following error is reported:
PANIC: Root volume is restricted. in SK process config_thread on
release 9.16.1P5 (C) on Fri Aug 1 22:15:30 GMT 2025
What action do you take to resolve the issue?

NO.41 Which statement about the 2.1.3 drive is true?

NO.42 Where is a kernel core file stored on a FAS9000 system that is running ONTAP 9.12.1 software?

NO.43 A new NetApp NS224 disk shelf is correctly cabled to a NetApp AFF HA pair. The disks show up as single-path. Which action corrects the issue?

NO.44 During an ONTAP upgrade, nodeA1 fails to boot. You notice that it is loading the previous version of ONTAP software. What step can be taken to boot the node successfully?

NO.45 You have a NetApp ONTAP cluster that is experiencing performance issues. The cluster shows the following messages in the EMS logs:

Which action do you take to resolve these messages?

NO.46 Which two commands from the Service Processor can provide information about installed field replaceable units (FRUs)? (Choose two.)

NO.47 During a health check you observe that NetApp ONTAP software is reporting CRC errors on a network port from a node in the cluster. Which component do you reseat?

NO.48 A NetApp ONTAP cluster has several data aggregates that contain over 400 data volumes. The aggregates are configured to share a cloud tier to an S3 bucket. All volumes use an automatic policy that moves cold data older than seven days to the object store. During an S3 provider outage, the customer was unable to access their cold data. Which action prevents downtime for each volume when the S3 provider has another outage?

NO.49 A company is performing a hardware refresh on a 2-node switched NetApp ONTAP cluster. They need to replace two older nodes that support only ONTAP releases earlier than ONTAP 9.8 software with two NetApp AFF systems that require ONTAP 9.12.1 or later releases. The cluster is currently running ONTAP 9.7. Which steps complete the hardware refresh with all nodes running on ONTAP 9.12.1 software without disruption?

NO.50 A storage administrator is troubleshooting a 4-node cluster, where one node is reporting “cluster port is down” alerts. The node has recently been recabled to new cluster switches. The cluster ping-cluster command shows communication failures between the affected node and its partners over the cluster network. All physical cables have been verified as properly seated and undamaged. Which configuration is causing this problem?

NO.51 A 4-node NetApp ONTAP cluster sent an AutoSupport message for a single power supply failure in the cluster. The alert shows a failure for both node-1 and node-4. Why are two different nodes affected by the failure?

NO.52 Which two tools can you use to invoke AutoSupport? (Choose two.)

NO.53 At what stage is a write acknowledged to a client?

NO.54 You are performing a head swap to upgrade your NetApp ONTAP controllers. After completing the first controller upgrade, the new controller does not show any cluster ports, and the new controller cannot communicate with the rest of the cluster. You verified that the new controller is cabled correctly, and swapped the cables, yet the ports still do not show. Which action resolves the issue and enables the new controller to communicate with the cluster?

NO.55 An aggregate has experienced a multiple disk failure due to a failing I/O module (IOM). The module has been replaced and the aggregate is still failed. What step can be taken to recover the aggregate?

NO.56 Which two statements regarding drive 1.2.3.L1 are true? (Choose two.)

NO.57 What is the PRIMARY advantage of an HA pair in a NetApp storage environment?

NO.58 A 4-node NetApp ONTAP cluster sent an alert that one of the cluster interconnect switches has failed. After replacement, the system administrator notices that half of the cluster LIFs are not on their home ports. Which parameter must the system administrator enable to automatically migrate the cluster LIFs?