CheckPoint 156-835 Practice Exam – 66 Unique Questions [Q24-Q46]

5/5 - (2 votes)

CheckPoint 156-835 Practice Exam – 66 Unique Questions

Latest Questions 156-835 Guide to Prepare Free Practice Tests

CheckPoint 156-835 exam is a vendor-specific certification exam that tests candidates on their ability to install, configure, and manage Check Point Maestro, a powerful orchestration solution that enables the management of multiple security gateways as a single entity. Candidates will be tested on their ability to design and deploy Check Point Maestro, as well as their ability to troubleshoot and optimize its performance.

The CheckPoint 156-835 exam comprises multiple-choice questions, and professionals need to score 70% or more to pass. 156-835 exam duration is 90 minutes, during which candidates will need to demonstrate their knowledge and skills in planning, installing, configuring, maintaining, and troubleshooting Check Point Maestro.

Q24. What does the lldpctl command do?

Show all devices discovered by LLDP protocol on downlink ports

Discover orchestrators

Show all devices discovered by LLDP protocol on uplink ports

Show all devices discovered by LLDP protocol on all ports

Q25. How many power supplies are presented on MHO-170?

1 with option for 2

Q26. What is the distribution mode?

Distribution mode is the same as QSFP mode

Distribution mode is how the Orchestrator distributes traffic in between Security Groups

Distribution mode means selected algorithm for traffic distribution in between Orchestrators

Distribution mode means selected algorithm for traffic distribution in between Appliances

Q27. Orchestrator should be defined in SmartConsole as:

Orchestrator is not defined in SmartConsole

Check Point host

Security Gateway

Host

Q28. What cannot be learned from the output of asg monitor command?

Appliances cluster status

Port status

Uptime

Security Policy status

Q29. What is the minimal requirement for a Security Group?

1 Appliance and 1 management port

2 Appliances and 2 ports

1 Appliance and 1 administrator with Multi-Domain admin permissions

None, it may be empty.

Q30. What is the purpose of g_tcpdump command?

Collects traffic dump from Sync network

The same as tcpdump, just on Scalable Platform

Collects traffic dump from CIN network

Collects traffic dump from all Active Appliances within Security Group

Q31. When running asg perf -v in a Dual-Site environment, we can see only Appliances from one of the sites. That means we’re working in:

VSLS mode

Active /Active

Active / Standby HA mode

This is not Dual-Site, in Dual-Site we always see Appliances from both sites

Q32. What is the maximum amount of Appliances within the same Security Group?

Q33. What is the throughput penalty of Security Group?

5% per member

Depends on the type of Appliance

10% per Security Group with no relation to amount of members

1% per member

Q34. There are two 10Gbps dual-port NICs and one 40Gbps NIC installed on a 23800 Appliance in slots 1, 2 and 3 accordingly. Which interfaces should be connected to Orchestrator 1 for downlinks’ intra-orchestrator redundancy when using two Orchestrators?

Any pair of available ports

Port 1 in Slot 2 and Port 2 in Slot 1

Port 1 in Slot 1 and Port 2 in Slot 1

This configuration is not supported

Q35. What is the Iterator process?

Iterator is the process that simulates distribution in case of Appliance failure

Iterator is the process that follow Appliance recovery and simulates what was a distribution if recovered Appliance was alive

Iterator is the process that runs on the Orchestrator and calculates a distribution in case of Appliance failure

Iterator is the process that runs on the Orchestrator and calculates a distribution in case of Appliance recovery

Iterator is the process that follows Appliance recovery and simulates what was a distribution if recovered Appliance was alive. The Iterator process runs on the Security Management Server and simulates the distribution of the Security Gateways if the recovered Appliance was alive. This helps ensure that the network remains secure and the traffic flow is optimized.

Q36. Which setting is required in order to connect an appliance with 40Gbps downlink interface and DAC to the Orchestrator MHO-140?

On Orchestrator: Change QSFP mode from 100Gbps to 40Gbps

On Orchestrator: Change port type from uplink to downlink

On Appliance: Change a port speed to 10Gbps

No change required

Q37. What is the default IP range of Sync network (with no increment)?

The same as Management network

198.51.100.0

192.0.2.0

192.168.1.0

Q38. What is the maximum amount of Appliances within Security group in Dual-Site configuration?

Q39. What kinds of transceivers are supported on Orchestrator MHO-140?

SFP, QSFP, QSFP28

SFP, SFP+, QSFP, QSFP28

SFP, SFP+, SFP28

SFP+, SFP28, QSFP

Q40. For a VSX configuration – Which statement is wrong?

All Virtual Systems exist on the SMO

All Virtual Systems exist on all Appliances

VSX configuration is the same on all Appliances within the same Security Group

Each Appliance owns different Virtual Systems

Q41. What is the basic installation sequence of the Orchestrator in case of single Orchestrator?
1. Create a Security Group
2. Configure Default Gateway
3. Connect with Serial Console cable to the Orchestrator
4. Configure IP for one of its Management interfaces
5. Connect an appliance to a downlink port
6. Change Orchestrator amount to 1
7. Browse to the Orchestrator’s WebUI

3-4-2-6-5-7-1

3-1-7-2-4-6-5

1-4-2-5-7-3-6

7-4-2-5-3-1-6

Q42. What is the default IP range of CIN network (with no increment)?

192.168.1.0

198 .51 .100. 0

The same as Management network

192. 0 .2 .0

Q43. Splitter cannot be used __________.

To connect single port on orchestrator to multiple Appliances

To connect single port on Appliance to multiple ports on the orchestrator

To connect single port on orchestrator to the same Appliance

To connect single port on orchestrator to multiple port on external switch

Q44. On MHO-170 – In default configuration, what are GAIA names of Security Group Management ports?

eth1-Mgmt1 and eth1-Mgmt2

eth1-Mgmt1 and eth2-Mgmt1

eth1-Mgmt1 and eth1-Mgmt3

eth1-Mgmt3 and eth1-Mgmt4

Q45. What is the Sync network on Appliances used for?

May be used for any purpose, but synchronization always have priority

To synchronize configurations and connections in between connection tables of different Appliances

To transfer configuration files from Orchestrators to Appliances

To transfer data in case of full utilization of the downlink interfaces

Q46. What is the difference between Dual-Site and Multi-Room?

Multi-Room is a Single-Site deployment where all Appliances are connected to both orchestrators

Multi-Room is a kind of Dual-Site deployment within the same building

Multi-Room is Active / Standby and Dual-Site is Active / Active

This is the same

Loading …

Correct and Up-to-date CheckPoint 156-835 BrainDumps: https://www.troytecdumps.com/156-835-troytec-exam-dumps.html

High-quality Troytec review files

CheckPoint 156-835 Practice Exam – 66 Unique Questions [Q24-Q46]

troytecdumps

Leave a Reply Cancel reply

Related Posts

CCME Real Exam Questions and Answers FREE 156-836 Updated on Oct 02, 2024 [Q31-Q50]

100% Reliable 156-835 Exam Dumps Test Pdf Exam Material [Q17-Q40]

[Jan-2023] Valid Way To Pass CheckPoint Exam Dumps with 156-560 Exam Study Guide [Q18-Q33]

troytecdumps

Leave a Reply Cancel reply