Guaranteed Success in CCNP Data Center 300-610 Exam Dumps [Q46-Q60]

Rate this post

Guaranteed Success in CCNP Data Center 300-610 Exam Dumps

Cisco 300-610 Daily Practice Exam New 2022 Updated 154 Questions

Career Prospects

Passing the Cisco 300-610 exam is always a challenge, especially when the associated certification is on the line. Therefore, choose the training tool that suits you best and start mastering the Data Center Infrastructure field. This will help you complete the test with flying colors and also kickstart your professional development. This means that you can become a Data Center Technician, a Data Center Engineer, a Technical Marketing Engineer, or a Customer Delivery Consulting Engineer. With the CCNP Data Center certificate on your resume, your average annual salary can be about $79,760, according to the ZipRecruiter website.

NO.46 Where does Cisco UCS handle Fibre Channel traffic failover?

on a Cisco UCS Fabric Interconnect ASIC in Fibre Channel switching mode

on the host, by using multipathing software

in the hardware on the Cisco UCS VIC 12xx adapter or later

in the hardware on any Cisco UCS VIC adapter

Section: Storage Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/unified-computing/ whitepaper_c11-701962.html

NO.47 Which authentication software natively runs within the CLI of Cisco NX-OS devices?

Python

Ansible

Puppet

Chef

Section: Automation Design

NO.48 Refer to the exhibit.

The FCoE packets fail to be forwarded through the switch. What is the minimum MTU QoS requirement for the FCoE to work?

9000 bytes

2000 bytes

2158 bytes

2240 bytes

Section: Storage Network Design

NO.49 What influences the number of ISLs that are required between Cisco MDS Series switches?

FCoE protocol

type of storage

end-to-end oversubscription ratio

N Port virtualization

NO.50 Drag and drop the configurations from the left onto the correct policies on the right.

NO.51 A network consultant must design a high availability interconnection of a clustered Cisco UCS Fabric Interconnect toward two upstream Layer 2 switches.
The Ethernet interconnection must use all redundant links and have no impact on the STP domain size.
Which connectivity solution must be used?

Cisco UCS Fabric Interconnect in switch mode with dual uplinks distributed evenly to the upstream switches

Cisco UCS Fabric Interconnect in switch mode with a single uplink toward each upstream switch to eliminate any change to the STP domain size

Cisco UCS Fabric Interconnect in end host mode with a single uplink toward each upstream switch to eliminate any change to the STP domain size

Cisco UCS Fabric Interconnect in end host mode with dual uplinks distributed evenly to the upstream switches

NO.52 Drag the appropriate from the left onto the current UDLD modes of operation on the right.

NO.53 Which type fields can an engineer use to identify an iSCSI participant? (Choose two.)

type

preshared key

port number

identifying tag

hostname

Section: Storage Network Design
Explanation/Reference: https://en.wikipedia.org/wiki/ISCSI

NO.54 Refer to the exhibit.

What must be the default gateway of the servers in EPG Web?

subnet address of BD1

subnet address of L3Out

subnet address of BD2

NAT appliance

NO.55 An engineer deploys LISP VM mobility. Which feature is configured on the interfaces that have VM mobility enabled?

IP redirects

flow control

proxy ARP

HSRP

NO.56 A Cisco UCS instance has four interfaces on a UCS VIC. Where on the fabric interconnect does each interface terminate?

vPC

virtual interface

port channel

physical port

NO.57 An engineer must design a solution based on Cisco Nexus 7709 Switches. The solution must connect test and development network segments and separate the enterprise applications from the production network. The network security team requires routing instances and the IP stack to be completely separated from each other and for traffic between the environments to undergo a deep packet inspection. The development team also requests the ability to allocate additional physical interfaces from the Cisco Nexus 7709 device in each environment.
Which solution meets these requirements?

1) Create a VRF for the testing and development environments.
2) Use ACLs to control traffic between the two environments.

1) Enable new routing instances for the testing and development environments in the same VDC.
2) Control reachability by using firewall access policies.

1) Assign a separate VDC for the testing and development environments.
2. Place a firewall between the VDCs.

1) Create a separate VRF for the testing and development environments.
2) Control reachability by using firewall access policies.

NO.58 Drag and drop the configurations from the left onto the correct policies on the right.

NO.59 Refer to the exhibit.

A cloud provider service provider deployed three geographically separated Cisco ACI data centers. One of the customers needs to host a clustered application that is spread across the three data centers. The cluster nodes that host the application need a layer 2 topology to communicate with each other. Which Cisco ACI topology design meets these requirements?

Multi-site

Multi-pod over MP-BGP EVPN

Multi-cloud

Multi-pod over OSPF EVPN

Each data center has its own APIC cluster. This is multi-site setup.

NO.60 Drag and drop the components from the left onto the descriptions on the right that indicate what occurs to Fibre Channel fabric when that component fails.