Q105. A network consultant must design a high availability interconnection of a clustered Cisco UCS Fabric Interconnect toward two upstream Layer 2 switches.
The Ethernet interconnection must use all redundant links and have no impact on the STP domain size.
Which connectivity solution must be used?

Q106. Drag and drop the technologies from the left onto the correct descriptions on the right.

Q107. Drag and drop the Cisco Nexus 7000 Series Switch resources from the left onto the correct groups on the right.

Q108. An engineer manages hundreds of Cisco Nexus 3000 Series and 9000 Series Switches that are installed at several data centers and wants to use one of the built-in automation tools of the Cisco NX-OS Guest Shell to automate daily activities. The engineer requires a tool that uses imperative language, has extensive library support, and is object-oriented.
Which automation tool should be used to meet these requirements?

Q109. What are two characteristics of VRF-Lite on the Cisco NX-OS platform? (Choose two.)

Q110. A Cisco engineer is analyzing a customer environment where dozens of VMs are running on a physical server and UCS chassis are cascaded The setup uses two ISLs in a port channel to the SAN switch (per fabric) The oversubscription from VM to physical SAN port is often 20 (VMs/host) x 72 (9 UCS chassis cascaded = 72 hosts): 2 (ISLs from fabric interconnect to SAN switch port on the NPV core (NPIV enabled switch) This results to 20 x 72 2 per single ISL = 720 VMs per ISL
20 (VMs per host) x 8 (hosts per chassis) x 9 (chassis per port channel to SAN switch) / 2 (ISLs per port channel) = 20 x 8 x 9 / 2 = 720 VMs per SAN F-port What is the best way to resolve possible IOPS bottleneck?

Q111. Refer to the exhibit. A customer must ensure that the interface on a switch has enough resources to sustain the line rate traffic during peak load.
Which action meets this requirement?

Q112. Drag the requirements from the left onto the correct policy types on the right.

Q113. Refer to the exhibit.

A customer runs an Online Transaction Processing (OLTP) application on Server1. The application generates a small number of transactions and requires low storage latency. Server2 is a backup server that performs backups twice a day During the backup window, the OLTP application experiences high-latency spikes that affect the application performance The customer must meet these requirements
* Maintain consistent low I/O latency for the OLTP server.
* Guarantee I/O throughput for the OLTP server during backup time
* Allow the customer to keep the existing hardware.
Which action must be taken to meet these requirements?

Q114. A Cisco UCS chassis with several blade servers, a pair of IOMs, and a pair of Cisco UCS Fabric Interconnects are installed in a data center.
Which two high-availability architectures are recommended between the IOMs and fabric interconnects? (Choose two.)

Q115. An ACI deployment must:
– Only use a proxy for border leaf switches.
– Classify incoming traffic on L3OUT.
– Immediately update the endpoint database when the endpoint moves
between leaf switches.
Which VRF configuration must be used?

Q116. DRAG DROP
A failure occurs on the network between two BFD and OSPF neighbors. Drag and drop the protocol actions from the left into the correct order on the right.
Select and Place:

Q117. Drag the requirements from the left onto the correct policy types on the right.

Q118. Which two naming formats identify target or initiator iSCSI nodes? (Choose two.)

Q119. Which mode must be enabled on a Cisco UCS Fabric Interconnect to connect directly to a storage array?

Q120. What is a design consideration when implementing FSPF?

Q121. Which Ethernet to Cisco Fabric Interconnect connectivity configuration is supported when FCoE is implemented?

Q122. An engineer is implementing a Cisco UCS environment The requirements for the solution are for the MAC addresses to be learned only on the server-facing ports. The use of the Spanning Tree Protocol must be avoided. Also, the engineer must have deterministic traffic handling from blades to uplink ports.
Which two settings must be selected to meet these requirements? (Choose two.)

Q123. A Cisco engineer is developing a custom application that can run natively in Cisco NX-OS on Nexus 9000 and Nexus 3000 platforms For the NX-SDK application to run the engineer enables the NX-SDK feature on the device Then the NX-SDK is imported into the application via an import nx_sdk_py statement. The engineer creates custom CLI commands and defines custom CLI command syntax within the sdkThread function When CLI commands originate from an NX-SDK application what class is this?

Q124. What can be implemented on Cisco Nexus 5600 Series Switches for link redundancy within a Fibre Channel fabric?

Q125. What is an advantage of Cisco HyperFlex Edge as compared to Cisco HyperFlex Standard Clusters?

Q126. Which approach splits a pair of clustered fabric interconnects into two standalone devices?

Q127. An engineer must use OTV for layer 2 connectivity between data centers to support virtual machine between the customer sites. To support this requirement, the engineer must ensure the existence of the same default gateway on both sites. Additionally, the operations team report high bandwidth utilization on site A and wants to optimize the outbound traffic flows to use a DC exit point. Which feature must be used to meet these requirement?

Q128. Which Cisco HyperFlex feature provides virtual machine-level cost scaling for desktop virtualization growth?