[Mar-2023] Pass Network Appliance NS0-162 Exam in First Attempt Guaranteed! [Q31-Q52]

4.5/5 - (2 votes)

[Mar-2023] Pass Network Appliance NS0-162 Exam in First Attempt Guaranteed!

Full NS0-162 Practice Test and 90 unique questions with explanations waiting just for you, get it now!

NO.31 You are asked to investigate possible solutions for increasing the performance of a read-intensive, NFSv3 workload in your FAS environment.
Which two NetApp technologies would satisfy this requirement? (Choose two.)

Flash Pool

FlexVol

FlexCache

FabricPool

NO.32 When deploying NVMe/FC, what must be supported and enabled on the host to ensure proper multipathing?

Asynchronous Namespace Access (ANA)

Asymmetric Logical Unit Access (ALUA)

single initiator multiple target zoning

NVMe Qualified Names (NQN)

NO.33 You attempt to create an SVM for CIFS access only.
In this scenario, which three actions must be performed to Join the existing Active Directory? (Choose three.)

Create DNS entries.

Create a data LIF.

Create export policies.

Create NTP entries.

Create a cluster LIF.

NO.34 Your company wants their newly Installed ONTAP system to automatically send telemetry data to NetApp to provide early notification of any security risks, bug fixes, and ONTAP updates. Furthermore, In case of hardware failures, a support case should be opened automatically at NetApp.
Which two NetApp components satisfy the requirements? (Choose two.)

Cloud Insights

Active IQ

ONTAP AutoSupport

Active IQ Unified Manager

NO.35 Click the Exhibit button.
A company has three servers that are using the iSCSI protocol to connect to a 2 node NetApp ONTAP cluster. The server administrator notices that half of the paths are down. When you check the ONTAP cluster, you notice that the servers are togging into only the first controller.
Referring to the exhibit, which two steps do you take to troubleshoot the issue? (Choose two.)

Verify that the UFs are up.

Verify that the ISCSI data protocol has been enabled on the ports.

Verify that each server has been rebooted.

Verify that the controller has not been taken over.

NO.36 Click the Exhibit button.
You are configuring your tape backup software to authenticate to your single-node cluster by using NDMP.
Referring to the exhibit, which LIF do you use to connect?

cluster1-01_ic1

cluster1-01_mgmt1

data_lif1

cluster_mgmt

NO.37 You are asked to deploy a 2-node ONTAP Select cluster. The physical hardware Is located In two different locations and you want the aggregates mirrored synchronously between the two data centers. You must ensure high availability and automated switchover. In this scenario, which two steps would you take to fulfill this requirement? (Choose two.)

Ensure that the ONTAP Select Deploy VM resides at a third location other than the two data centers.

Install the SnapMirror Sync license on the cluster.

Use ONTAP Mediator service to make sure that you have a quorum for the two nodes.

Use ONTAP Select Deploy to Install the nodes on the physical hardware.

NO.38 You have an ESXI cluster with VMware VMFS LUNs on an AFF A400 system. After troubleshooting performance Issues, you determine that timeout best practices are not set on the hosts.
In this scenario, which NetApp tool would apply the best practice settings?

SnapCenter Plug-in for VMware vSphere

SAN Host Utilities

Virtual Storage Console (VSC)

SnapManager

NO.39 You have a 2-node NetApp FAS500f system serving NAS and SAN protocols. The cluster is running NetApp ONTAP 9.8. You have a requirement to use SnapMirror to mirror your data to public cloud object storage.
In this scenario, which ONTAP native solution is supported?

Flash Pool

Cloud Backup Service

Cloud Compliance service

Cloud Sync

NO.40 Exhibit.

A user cannot save a file on an ONTAP SMB share.
Referring to the exhibit, which action allows the user to save the file?

Allow the file type *, rtf In the CIFS Server fpolicy.

Let the user save the file to a writeable location.

Synchronize the ONTAP Cluster time to the Active Directory time.

Set the user permission for the share to write.

NO.41 After deploying an ONTAP 9.8 cluster, you want to disable the unused Ethernet ports. In this scenario, which two methods would accomplish this task? (Choose two.)

Use ONTAP System Manager.

Use the command line interface.

Use Active IQ Config Advisor.

Use Active IQ Unified Manager.

NO.42 You are asked to deploy a 2-node ONTAP Select cluster. The physical hardware Is located In two different locations and you want the aggregates mirrored synchronously between the two data centers. You must ensure high availability and automated switchover. In this scenario, which two steps would you take to fulfill this requirement? (Choose two.)

Ensure that the ONTAP Select Deploy VM resides at a third location other than the two data centers.

Install the SnapMirror Sync license on the cluster.

Use ONTAP Mediator service to make sure that you have a quorum for the two nodes.

Use ONTAP Select Deploy to Install the nodes on the physical hardware.

NO.43 You want to prevent a single file from filling up a single constituent in a FlexGroup.
Which FlexGroup feature in ONTAP 9.7 will accomplish this task?

fractional reserve

Flash Pool

elastic sizing

Snapshot autodelete

NO.44 Exhibit.

Referring to the exhibit, what would cause a customer to have an Issue with SVM eplc_fcp when mapping a namespace to a host?

FC has not been licensed on the cluster.

NVMe Is not configured for the SVM.

FC switch zoning has not been done correctly.

NVMe is not licensed on the cluster.

NO.45 Your company requests that the monthly performance data of your ONTAP 9.8 cluster be exported to a CSV file for further processing. In this scenario, which three NetApp products satisfy this requirement? (Choose three.)

Active IQ Unified Manager

Cloud Insights

Active IQ Config Advisor

ONTAP System Manager

Active IQ OneCollect

NO.46 Click the Exhibit button.
Referring to the exhibit, what happens to the space in the volume if the Space Reserve option is set to “Enable”?

The LUN does not use any space from the volume since it is thin provisioned.

The volume grows by 100 GB to handle the LUN size of 100 GB.

The volume shows that 100 GB has been allocated to the LUN.

The volume shrinks by 100 GB to provide the LUN 100 GB of space to use.

NO.47 Exhibit.

You are caching on-premises ONTAP volumes into the cloud with Cloud Volumes ONTAP as shown in the exhibit. In this scenario, which two protocols are supported? (Choose two.)

SMB

NVMe

ISCSI

NFS

NO.48 When you perform an upgrade using ONTAP System Manager 9.8, which two statements are true? (Choose two.)

The latest available Images will appear In the ONTAP System Manager interface.

The images will be automatically uploaded to the cluster by using the ONTAP System Manager interface from the NetApp Support site.

The update history is available within the ONTAP System Manager interface.

The Images must be manually uploaded to the cluster by using the ONTAP System Manager interface.

NO.49 Exhibit.

A Linux host with the 10.0.1.24 IP address is unable to mount the VOL_A volume using NFSv3.
Referring to the exhibit, what is the problem?

The host IP address does not match the export policy rule.

The volume is in read-only.

The volume is not mounted In the namespace.

The logical Interface does not allow the NFSv3 protocol.

NO.50 What are the two capabilities of an SVM administrator? (Choose two.)

to create LUNs

to create new users

to delete snapshot copies

to delegate an aggregate to the SVM

NO.51 You are asked by your network engineering team to make sure that your NetApp cluster Is configured to run LACP on Its network ports. Which network component satisfies this request?

VLAN

Interface group

broadcast domain

failover group

NO.52 Exhibit

You need to provision a new NFS datastore for a vSphere cluster. You configure a new SVM and a new volume on your ONTAP cluster. You successfully mount the datastore to your vSphere cluster. You are able to upload and download a test 1 KB file to and from the datastore. You can also successfully ping the NFS LIF (192.168.106.11) from the vSphere hosts without any packet loss. However, you are unable to upload ISO Images or migrate VMs to the new datastore.
Referring to the exhibit, which action would correct the problem?