[Feb 26, 2024] 100% Latest Most updated NS0-520 Questions and Answers [Q112-Q127]

5/5 - (2 votes)

[Feb 26, 2024] 100% Latest Most updated NS0-520 Questions and Answers

Try with 100% Real Exam Questions and Answers

NO.112 Which four FC fabric topologies does NetApp support? (Choose four.)

four FC switches with multiple Inter-Switch Links (ISLs) between each pair of switches

ten FC switches per fabric, daisy chained with a single ISL between switches

four FC switches with multiple ISLs between ALL switches

eight FC switches with no more than a single ISL between switches in a cascade topology

dual FC switches with no ISLs

a single FC switch

a switched fabric that has 65537 ports

NO.113 You create a 20 GB LUN in a newly created 100 GB FlexVol volume. You then write 5 GB of data to the LUN. You have space reservation disabled on the LUN.
In this scenario, how much space do you have left on the volume?

95 GB

80 GB

75 GB

85 GB

NO.114 During maintenance of an AFF A250 node, you want to move the SAN LIFs that are members of a port set. In this scenario, which two statements are true? (choose two)

You must disable SLM for the node that hosts the LIF

You need to disable the zoning of the LIF WWPN

The LIF must be removed from the port set

You must take the SAN LIF offline

NO.115 When booting your NetApp storage system for the first time the system fails to boot.
What should you do first to address this problem?

You turn off your storage system and disk shelves, and then turn on the disk shelves. You then check the quick reference card that came with the disk shelf for information about LED responses.

You re-download the boot image to the compact flash card, then reboot the system.

You look for a description of the problem on the LCD and console. You then follow the instructions, if provided, on the LCD and console.

You verify disk shelf compatibility and check the disk shelf IDs to verify that the disk shelf 1 (for DS14 series) must be connected to your system.

NO.116 Exhibit.

You are moving volumes between aggregate aft_01_aggr1 and the aggregate Aggr_Data shown in the exhibit.
How much space will be moved?

11.17 TB

935.75 GB

296 KB

1. 91 TB

NO.117 An administrator has migrated an ISCSI LUN with Foreign LUN Import (FLI) tool. The migrated LUN is presented on the new system, but it is not visible to the host. In this scenario which additional action must be completed to make the LUN visible?

Bind the igroup to a port set

Install ANA software on the host

Stop the FCP service

Map the LUN to an ISCSI igroup

NO.118 What information should you document about your storage fabrics? (Choose two.)

zoning configuration

igroup name

name service

Inter-Switch Links (ISLs)

NO.119 What is a prerequisite for enabling SCSI UNMAP support for SAN attached hosts?

The space-slo parameter must be set to semi-thick.

The space-slo parameter must be set to none.

The space-allocation parameter must be enabled.

The LUN mapping must be deleted.

NO.120 You will be purchasing two high availability NetApp AFF A700s systems. You want to set up a 4-node cluster. Which switch would you use for the cluster interconnect switches?

NetApp CN1610

Cisco Nexus 3132Q-V

Cisco Nexus 5548UP

Cisco Nexus 5020

NO.121 Exhibit.

An administrator is configuring FCoE on Cisco Nexus switches for a new AFF A200 ONTAP cluster. The administrator executes the commands shown in the exhibit to create the necessary network configuration.
Which VLAN is responsible for controlling the FCoE traffic on the new interface?

3011

NO.122 Click the Exhibit button.

A customer is troubleshooting an AFF A700 2-node cluster that is running out of space. They need to add two additional shelves, one shelf to stack-1, and a shelf to stack-2.
Referring to the exhibit, how many cables are required?

NO.123 Click the Exhibit button.

Referring to the exhibit, which two Fibre Channel names should you zone on the FC switch to provide connectivity to the LUN? (Choose two.)

50:0a:09:82:9c:16:cc:00

50:0a:09:82:9c:7a:4e:00

20:00:00:50:56:9c:16:cc

20:01:00:50:56:9c:16:cc

NO.124 Which two requirements must be satisfied to run an Upgrade Advisor report on a Netapp All SAN Array? (choose two)

The cluster nodes must have a valid support contract

Autosupport must be enabled

The vsadmin account must be enabled

The Connectivity, Liveness, Availability Monitor (CLAM) must be enabled

NO.125 You have a 4 node cluster with an AFF A300 HA pair and a FAS8200 HA pair. You plan on using the default storage efficiency settings. With inline data compaction, you estimate that you can save 6% of storage space. AFF A300 LUNs that use under 5000 IOPS are moved to a FAS8200 using the lun move command.
In this scenario, what happens to the data after the LUN is moved? (Choose two.)

The new written data is not compacted.

The new written data is compacted.

The existing data is compacted.

The existing data is not compacted.

NO.126 A company wants to use jumbo frames to improve performance with their iSCSI network. When setting up the Ethernet switches for jumbo frames, which three components need to be configured? (Choose three.)

Ethernet port on Management Console

Ethernet port on RLM

Ethernet port on host system

Ethernet port on storage device

Ethernet port on FC switch

Ethernet switch ports being used

NO.127 Click the Exhibit button.

An administrator is trying to configure a multiple-hop Cisco MDS switch and is receiving the error shown in the exhibit.
In this scenario, which action will solve this problem?