NEW QUESTION 42
Drag and Drop Question
What documents should be included in the solution proposal? (Place the correct items into the list at the right. Order is not important. Not all options will be used)

NEW QUESTION 43
The clients existing network is experiencing trouble with voice occasionally dropping out on phone calls between office locations, it Is determined that no packet loss is occurring and QOS is likely the cause. With what phenomenon Is the client currently experiencing issues?

NEW QUESTION 44
Which member types require a reboot when doing an In-Service-Software-Upgrade within a VSF stack?

NEW QUESTION 45
‘Don’t Buy at Us’ is a US-based retail company that is expanding into Europe. They are expanding into EMEA with a regional headquarters called HQ2 inside The Netherlands. Their US- based headquarters HQ1 was refreshed last year based on the HPE Aruba Networking ESP architecture. You have created the design for HQ2 based on the same design as HQ1, a two-tier architecture. The high level is shown below.

Switch BOM for this project based on Two Tier:
Collapsed Core: 2 x Aruba 8360-16Y2C in VSX (ISL 2x100GbE DAC)
Access Stack: 10 x Stack of 6200F 48G Class4 PoE 4SFP+ 740W (each stack has 4 members, VSF with 10GbE VSF links) (2 x 10GbE uplink per stack) During the presentation of your design to the CTO of “Don’t Buy at Us” you were informed about the changes they want you to incorporate into the updated design:
1. HQ2 will include the EMEA regional distribution center (EMEA-DISTR) next to the HQ2.
2. Only two pairs of OS1 are available between HQ2 and EMEA-DlSTR.
3. The uplinks from all access stacks need to increase to 2 x 25GbE, the fiber in HQ2 and EMEA- DISTRI is certified for 25GbE.
4. EMEA-DlSTR needs at least 7 x stack of Aruba 48 ports switches (each stack has 4 members).
Which answer based on best practice is presenting the correct Switch BOM tor the updated design?

NEW QUESTION 46
Hotspot Question
Based on this campus design, click on the layer that is the most appropriate to be designed as a Stub Persona, considering an EVPN VXLAN Fabric?

NEW QUESTION 47
Drag and Drop Question
What should be Included in an Executive Summary? (Place the correct Items into the let at the right Order is no: Important Not all cottons win be used)

NEW QUESTION 48
A global cruise line company needs to refresh its current fleet. They win refresh the insides’ of the ship to be cost-effective and increase their sustain ability. They Mill replace the complete WLAN/LAN hardware of the ship. In this refresh, the company will not refresh Us current security requirements. The CIO also wants to limit the number of unused ports in the switches. Future expansion will always mean a refresh of hardware. They start with the smallest ship with a maximum of 800 guests. Each ship has a LAN infrastructure consisting of two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins, 100 technical rooms). The Core switches are located in the MDF of the ship and the distribution switches are located in the IDFs of the ship. Each cabin and technical room gets one single access switch.
The cabling structure of the ship will not be refreshed. Each IDF is connected to the MDF by SMF. of which two pairs are available for the interconnect between the core and distribution. The length of SM fiber between MDF and IDF is less than 300 meters (930 ft) and the type used is OS1. Each cabin is connected by a single OM2 pair to the IDF, the maximum length is 60 meters (200 ft). Each technical room is connected by a single OM2 pail to the IDF, with lengths between
100 and 150 meters (320 and 500 ft).
For each cabin/technical room the customer is looking to replace their current fan-less 2530/2540 without changing the requirements, except they need to upgrade the uplink to distribution switch to 10GbE to handle the increased network traffic, and the technical rooms need redundant power.
The WLAN infrastructure will be 1:1 refreshed without new cabling or new AP locations. Their WLAN Infrastructure is based on the 200/300 series Indoor and outdoor APs running instantOS (less than 300 APs), the customer has no change in WLAN requirements.
The cruise line company will replace its current Internet connection before the LAN/WLAN refresh. The new Internet connection will provide a 99.8% uptime, which is needed to ensure the paid guest Wi-Fi is always operational. With this new internet connection, the CIO of the cruise line wants to base the design on the ESP architecture from Aruba because Internet connection is guaranteed.
The week after the presentation of your design to the CIO of the cruise line company, the CIO calls you to discuss increasing trie security of the wired network Infrastructure. Since one of their competitors had one of their cruise ships cyber hacked, the CSO of the cruise line has mandated increased security on the wired network. They nave heard about dynamic segmentation and central and decentral overlay networks. What would you advise as the most cost-efficient solution?

NEW QUESTION 49
Which technology is used to extend the range of wireless signals in an HPE Aruba wireless network?

NEW QUESTION 50
Drag and Drop Question
What documents should be included in the solution proposal? (Place the correct items into the list at the right. Order is not important. Not all options will be used)

NEW QUESTION 51
You meet with a customer to update the network when the previous network manager has left the company for another position. What are some of the methods to validate the current network state when the available network documentation is not valid? (Choose two.)

NEW QUESTION 52
What is the difference between OM4 and OM5 cabling? (Select two)

NEW QUESTION 53
A global cruise line company needs to refresh its current fleet. They will refresh the ‘insides’ of the ship to be cost-effective and increase their sustainability. They will replace the complete WLAN/LAN hardware of the ship. In this refresh, the company will not refresh its current security requirements. The CIO also wants to limit the number of unused ports in the switches. Future expansion will always mean a refresh of hardware. They start with the smallest ship with a maximum of 800 guests.
Each ship has a LAN infrastructure consisting of two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins, 100 technical rooms). The Core switches are located in the MDF of the ship and the distribution switches are located in the IDFs of the ship. Each cabin and technical room gets one single access switch.
The cabling structure of the ship will not be refreshed. Each IDF is connected to the MDF by SMF, of which two pairs are available for the interconnect between the core and distribution. The length of SM fiber between MDF and IDF is less than 300 meters (980 ft) and the type used is OS1. Each cabin is connected by a single OM2 pair to the IDF, the maximum length is 60 meters (200 ft). Each technical room is connected by a single OM2 pair to the IDF, with lengths between
100 and 150 meters (320 and 500 ft).
For each cabin/technical room the customer is looking to replace their current fan-less 2530/2540 without changing the requirements, except they need to upgrade the uplink to distribution switch to 10GbE to handle the increased network traffic, and the technical rooms need redundant power.
The WLAN infrastructure will be 1:1 refreshed without new cabling or new AP locations. Their WLAN infrastructure is based on the 200/300 series indoor and outdoor APs running InstantOS (less than 300 APs), the customer has no change in WLAN requirements.
The cruise line company will replace its current Internet connection before the LAN/WLAN refresh. The new Internet connection will provide a 99.8% uptime, which is needed to ensure the paid guest Wi-Fi is always operational. With this new internet connection, the CIO of the cruise line wants to base the design on the ESP architecture from Aruba because Internet connection is guaranteed.
Based on HPE Aruba Networking best practices and the customer’s stated requirements, which segmentation design approach is appropriate for this environment?

NEW QUESTION 54
You are working with a large enterprise customer that is preparing to deploy HPE Aruba Networking ClearPass Policy Manager (CPPM) across multiple campus locations. They have asked you to include ClearPass Insight in your technical proposal so they can benefit from its historical reporting and analytics capabilities.
As part of the design consultation, the customer specifically wants to understand:
– Whether Insight requires additional licensing or subscriptions.
– How enabling Insight will impact the size and structure of their CPPM cluster.
– Any best practices they should follow for enabling Insight in a
resilient and scalable way.
Confirm which statements about HPE Aruba Networking ClearPass Insight are accurate, so they can plan for the correct number of nodes and licensing in the IRIS-generated Bill of Materials.
(Choose two.)

NEW QUESTION 55
A large multinational financial institution has contracted you to design a new full-stack wired and wireless network for their new 6-story regional office building. The bottom two floors of this facility will be retail space for a large banking branch. The upper floors will be carpeted office space for corporate users, each floor being approximately 100.000 sq ft (9290 sqm). Data centers are all off site and will be out of scope for this project. The customer is underserved by its existing L2-based network infrastructure and would like to take advantage of modern best practices in the new design. The network should be fully resilient and fault-tolerant, with dynamic segmentation at the edge.
The retail space will include public guest Wi-Fi access. Retail associates will have corporate tablets for customer service, and there will be a mix of wired and wireless devices throughout the retail floors. The corporate users will primarily use wireless for connectivity, but several wired clients, printers, and hard VoIP phones will be in use.
The customer is also planning on renovating the corporate office space in order to take advantage of “smart office’ technology. These improvements will drive blue-dot wayfinding.
presence analytics, and other location-based services. The client would like 10 include Blue Dot location tracking in their four floors of corporate space. The APs are not Ideally placed to allow for smooth map transitions. What could you add lo provide better tracking? (Select two.)

NEW QUESTION 56
A large multinational financial institution has contracted you to design a new full-stack wired and wireless network for their new 6-story regional office building. The bottom two floors of this facility will be retail space for a large banking branch. The upper floors will be carpeted office space for corporate users, each floor being approximately 100,000 sq ft (9290 sq m). Data centers are all offsite and will be out of scope for this project. The customer is underserved by its existing L2- based network infrastructure and would like to take advantage of modem best practices in the new design. The network should be fully resilient and fault-tolerant, with dynamic segmentation at the edge.
The retail space will include public guest Wi-Fi access. Retail associates will have corporate tablets for customer service, and there will be a mix of wired and wireless devices throughout the retail floors. The corporate users will primarily use wireless for connectivity, but several wired clients, printers, and hard VoIP phones will be in use.
The customer is also planning on renovating the corporate office space in order to take advantage of ‘smart office’ technology. These improvements will drive blue-dot wayfinding, presence analytics, and other location-based services.
The client decides that they would like for all of their exposed printer, conference room, and VoIP phone connections to be controlled by a stateful firewall.
What could be planned to ensure that these ports will meet the customer’s requirements?

NEW QUESTION 57
Drag and Drop Question
Refer to the exhibit. Match the HPE Aruba Networking (ANW) Secure Service Edge (SSE) cloud services to their correct descriptions.

NEW QUESTION 58
XYZ Regional Hospital is an integrated healthcare system of hospitals, neighborhood health centers, and small doctor offices. XYZ Regional Hospital has recently merged with 4x neighborhood health centers and 125 doctor branch offices. The wireless, wired access, and AAA solutions are outdated and need to be replaced.
XYZ Regional Hospital is looking to future-proof and improve efficiency across all sites by enhancing wired and wireless access and migrating to a centralized and unified wired/wireless and policy management that can provide uninterrupted availability of all systems.
Locations:
– XYZ Regional Hospital is located in New York City
– Dila Health Center is located in City A
– Mount Health Center is located in City B
– Rock Health Center is located in City C
– Branch clinics are located at different locations across the United States Requirements:
– Provide, via management software, one single pane of glass to manage wired and wireless LANs, and VPNs across campus, branch, and remote via web/cloud architecture providing near real-time insight, troubleshooting tools, and Service Level performance reporting.
– Seamless integration across wired, wireless, WAN, SD-Branch, IoT
– Provide secure wireless access to all the employees of the Regional Hospital and partners, as well as provide wireless Internet access to medical citizens when they visit our facilities.
– All-access points must support the following features and specifications: 802.11.ax (Wi-Fi 6E Certified)
– Security options including WP2/WPA3, 802.1X with Radius secure authentication
– Identify and authenticate every wireless and wired device
– End-to-end role-based security
– Seamless mobility across the hospital for medical teams, patients, and visitors
– Cuts Wi-Fi deployment times from days to hours and enables Zero-Touch deployments across the site
– Establishes a resilient, future-ready network infrastructure with the intelligence, scalability, and intuitive toolsets to meet emerging needs
– Fully redundant branch solution with dynamic path selection to the hospital A Regional Hospital will be implementing RADIUS authentication across all their switches. They are looking for a solution wherein they can use HPE Aruba Networking ClearPass Policy Manager to allow staff members from five different teams (AV team, security team, desktop/printer team, voice team, network & security team) to register these types of devices and control access to them to a specific team.
This registration, visibility, and access control to devices must be self-service. In addition, device registration needs to be removable on a scheduled basis.
What is the most appropriate solution for the hospital’s requirements?

NEW QUESTION 59
Manufacturing ABC is an international, mid-sized company specializing in producing industrial equipment. They have been in the market for over two decades and have established themselves as a reputable player in their industry. However, due to rapid technological advancements, their current network infrastructure is outdated and struggling to keep up with the demands of modern manufacturing processes.
Manufacturing ABC’s network is a mix of multi-vendor legacy wired and wireless components, causing frequent downtime and hampering their production efficiency. The aging equipment leads to slow data transfer rates, unreliable connectivity, and increased vulnerability to cyber threats.
Fiber Cabling should be also upgraded as mostly OM2 is being used.
Compounding the network issues, the recent departure of the CTO has left the company without a clear direction for the network refresh project. There is a lack of consensus among the management team regarding the scope, budget, and timeline for the upgrade.
The primary objectives of the manufacturing customer are as follows:
– Improve network performance and reliability to enhance production processes and minimize downtime
– Enhance network security to protect sensitive data and intellectual property
– Streamline communication and collaboration among different departments within the organization
– Ensure scalability to accommodate future growth and technology advancements Manufacturing ABC seeks a comprehensive network refresh that includes the following components:
– Upgrading the wired infrastructure to high-speed Ethernet switches to support increased data transfer rates and reduce latency
– Implementing a robust wireless solution with enterprise-grade access points to provide seamless connectivity across the manufacturing facility
– Centralized network management tools to simplify administration and monitoring of the network Expectations:
The customer expects the network refresh project to be handled efficiently, with minimal disruption to their ongoing operations. They are looking for a reliable and experienced network solutions provider who can understand their unique manufacturing requirements and deliver a customized solution that aligns with their budget constraints. The manufacturing customer is keen on receiving clear project proposals and support in decision-making, given the recent change of the CTO.
Your role as a network solutions provider is to address their concerns, offer expert guidance, and present a well-defined plan to meet their objectives effectively.
A manufacturing customer operates a 24/7 production facility and is concerned that the migration will disrupt the production chain.
What are two ways to minimize or eliminate this disruption? (Choose two.)

NEW QUESTION 60
What is the recommended bandwidth of a VSX Inter-Switch Link?

NEW QUESTION 61
Drag and Drop Question
Match the deployment type to the estimated number of APs.

NEW QUESTION 62
You are meeting with various stakeholders in a customer’s IT organization as part of an HPE Aruba Networking campus access layer design project. You need to gather technical input to support design decisions, such as switch port capacity, uplink requirements, and user connectivity needs.
Which two stakeholders are involved in these design activities? (Choose two.)

NEW QUESTION 63
Refer to the exhibit.

As part of a migration plan from HPE Aruba Networking AOS-8 to AOS-10, which represent valid technical requirements for the proposed deployment?

NEW QUESTION 64
A large multinational financial institution has contracted you to design a new full-stack wired and wireless network for their new 6-story regional office building. The bottom two floors of this facility will be retail space for a large banking branch. The upper floors will be carpeted office space for corporate users, each floor being approximately 100,000 sq ft (9290 sq m). Data centers are all offsite and will be out of scope for this project. The customer is underserved by its existing L2- based network infrastructure and would like to take advantage of modem best practices in the new design. The network should be fully resilient and fault-tolerant, with dynamic segmentation at the edge.
The retail space will include public guest Wi-Fi access. Retail associates will have corporate tablets for customer service, and there will be a mix of wired and wireless devices throughout the retail floors. The corporate users will primarily use wireless for connectivity, but several wired clients, printers, and hard VoIP phones will be in use.
The customer is also planning on renovating the corporate office space in order to take advantage of ‘smart office’ technology. These improvements will drive blue-dot wayfinding, presence analytics, and other location-based services.
The client would like to include Blue Dot wayfinding for their carpeted office space. The retail floors are not currently in scope.
What would be needed to ensure proper licensing of the solution?

NEW QUESTION 65
Which of the following best describes HPE’s Intelligent Resilient Framework (IRF)?

NEW QUESTION 66
A global cruise line company needs to refresh its current fleet. They will refresh the ‘insides’ of the ship to be cost-effective and increase their sustainability. They will replace the complete WLAN/LAN hardware of the ship. In this refresh, the company will not refresh its current security requirements. The CIO also wants to limit the number of unused ports in the switches. Future expansion will always mean a refresh of hardware. They start with the smallest ship with a maximum of 800 guests.
Each ship has a LAN infrastructure consisting of two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins, 100 technical rooms). The Core switches are located in the MDF of the ship and the distribution switches are located in the IDFs of the ship. Each cabin and technical room gets one single access switch.
The cabling structure of the ship will not be refreshed. Each IDF is connected to the MDF by SMF, of which two pairs are available for the interconnect between the core and distribution. The length of SM fiber between MDF and IDF is less than 300 meters (980 ft) and the type used is OS1. Each cabin is connected by a single OM2 pair to the IDF, the maximum length is 60 meters (200 ft). Each technical room is connected by a single OM2 pair to the IDF, with lengths between
100 and 150 meters (320 and 500 ft).
For each cabin/technical room the customer is looking to replace their current fan-less 2530/2540 without changing the requirements, except they need to upgrade the uplink to distribution switch to 10GbE to handle the increased network traffic, and the technical rooms need redundant power.
The WLAN infrastructure will be 1:1 refreshed without new cabling or new AP locations. Their WLAN infrastructure is based on the 200/300 series indoor and outdoor APs running InstantOS (less than 300 APs), the customer has no change in WLAN requirements.
The cruise line company will replace its current internet connection before the LAN/WLAN refresh. The new Internet connection will provide a 99.8% uptime, which is needed to ensure the paid quest Wi-Fi is always operational. With this new Internet connection, the CIO of the cruise line wants to base the design on the ESP architecture from Aruba because internet connection is guaranteed.
The week after the presentation of your design to the CIO of the cruise line company, the CIO calls you to discuss increasing the security on the wired network infrastructure. Since one of their competitors had one of their cruise ships cyber hacked, the CSO of the cruise line has mandated increased security on the wired network. They have heard about dynamic segmentation and central and decentral overlay networks. For their POS systems, they need a low-latency network connection between the POS system and the POS server in the data center on the ship. Also, the CSO wants to enhance the WLAN security as well by tunneling all user traffic.
What solution fits the customer’s requirements?